U1004 Jeep Code - Controller Area Network Bus Transmit Performance
Quick Answer
The Diagnostic Trouble Code (DTC) sets if the Controller Area Network (CAN) frame does not receive acknowledgment for a predefined amount of time. Common causes include Intermittent Controller Area Network Bus Transmit Performance, Check for other codes, Faulty Anti-lock Brake System (ABS) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1004 Jeep indicates Controller Area Network Bus Transmit Performance.
- Common causes
- Common causes include Intermittent Controller Area Network Bus Transmit Performance, Check for other codes, Faulty Anti-lock Brake System (ABS) Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1004 Jeep Description
What are the Possible Causes of the DTC U1004 Jeep?
- Intermittent Controller Area Network Bus Transmit Performance
- Check for other codes
- Faulty Anti-lock Brake System (ABS) Module
- Anti-lock Brake System (ABS) Module harness is open or shorted
- Anti-lock Brake System (ABS) Module circuit poor electrical connection
How to Fix the DTC U1004 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1004 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1004 Jeep code?
Need more information on how to fix the U1004 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1004 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1004 Jeep Code
1. What are the common symptoms of OBDII code U1004 in a Jeep related to Controller Area Network Bus Transmit Performance?
The common symptoms include issues with the transmission, engine misfires, poor fuel economy, and problems with the vehicle's overall performance.
2. What are the possible causes of OBDII code U1004 in a Jeep?
The possible causes of this code include faulty wiring or connections in the CAN bus system, a defective powertrain control module (PCM), or issues with other control modules in the vehicle.
3. How can I diagnose the cause of OBDII code U1004 in my Jeep?
Diagnosing this code typically involves using a scan tool to check for other related codes, inspecting the CAN bus connections and wiring for any damage, and testing the powertrain control module (PCM) and other control modules for proper functionality.
4. Can I drive my Jeep with OBDII code U1004 present?
It is not recommended to drive your Jeep with this code present, as it can lead to further damage to the vehicle and potentially cause safety hazards on the road.
5. What are some repair tips for fixing OBDII code U1004 in a Jeep?
Repair tips for this code may include repairing or replacing damaged wiring in the CAN bus system, replacing the powertrain control module (PCM) if necessary, and ensuring all control modules are functioning properly.
6. How much does it typically cost to repair OBDII code U1004 in a Jeep?
The cost of repairing this code can vary depending on the extent of the damage and the specific repairs needed. It is recommended to consult with a professional mechanic for an accurate cost estimate.
7. Is OBDII code U1004 a common issue in Jeeps?
While not extremely common, OBDII code U1004 related to Controller Area Network Bus Transmit Performance can occur in Jeeps, especially in older models or vehicles with existing electrical issues.
8. Can resetting the OBDII code U1004 in my Jeep make it go away permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the code is not addressed, it is likely to reappear. It is important to diagnose and repair the root cause of the problem.
9. Are there any preventive measures to avoid OBDII code U1004 in a Jeep?
Regular maintenance checks, ensuring all wiring and connections are secure, and addressing any electrical issues promptly can help prevent OBDII code U1004 in a Jeep.
10. Can a DIY enthusiast fix OBDII code U1004 in a Jeep?
While some DIY enthusiasts may be able to diagnose and repair this code, it is recommended to seek professional help, especially if the issue involves complex electrical components or control modules in the vehicle.
Discuss the causes and fixes for U1004 Jeep OBDII Code
Code U1004 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
