AutoCodes – Toyota – U1002 2015 Toyota RAV4

U1002 2015 Toyota RAV4 Code - Lost Communication with Gateway Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Gateway Module, Gateway Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1002 2015 Toyota RAV4 indicates Lost Communication with Gateway Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Gateway Module, Gateway Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 243

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1002 2015 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Gateway Module has not been received.

OBDII Code U1002 2015 Toyota RAV4 - Lost Communication with Gateway Module - AutoCodes.com — U1002 2015 Toyota RAV4 Code - Lost Communication with Gateway Module

What does this mean?

What are the Possible Causes of the DTC U1002 2015 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Gateway Module
Gateway Module harness is open or shorted
Gateway Module circuit poor electrical connection

How to Fix the DTC U1002 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1002 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1002 2015 Toyota RAV4 code?

Need more information on how to fix the U1002 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1002 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1002 2015 Toyota RAV4 Code

1. What does the OBDII code U1002 mean on a 2015 Toyota RAV4?

The code U1002 indicates a communication problem between the vehicle's control modules and the Gateway Module, resulting in a lost connection.

2. What are the common symptoms of U1002 in a Toyota RAV4?

Common symptoms of U1002 include issues with the vehicle's network communication, such as warning lights on the dashboard, loss of certain functions (e.g., power windows not working), and difficulty accessing diagnostic information.

3. What are the possible causes of the U1002 code in a 2015 Toyota RAV4?

Potential causes of the U1002 code include a faulty Gateway Module, wiring or connection issues between modules, software glitches, or a malfunction in one of the control modules within the vehicle.

4. How can I diagnose the U1002 code in my Toyota RAV4?

Diagnosing the U1002 code typically involves using an OBDII scanner to retrieve the code, checking for any related codes or communication issues, inspecting the wiring and connections between modules, and performing a thorough system scan to pinpoint the problem.

5. Can I still drive my Toyota RAV4 with the U1002 code present?

It is not recommended to drive your vehicle with the U1002 code active, as it can lead to further communication issues between critical control modules and affect the overall performance and safety of the vehicle.

6. How can I repair the U1002 code in my 2015 Toyota RAV4?

Repairing the U1002 code may involve replacing the faulty Gateway Module, repairing any damaged wiring or connections, updating software in the control modules, or seeking professional assistance to address the communication issue effectively.

7. Are there any DIY tips to troubleshoot the U1002 code in a Toyota RAV4?

DIY troubleshooting tips for the U1002 code may include checking the fuses related to the Gateway Module, inspecting the wiring harness for visible damage, and ensuring all connections are secure and free of corrosion.

8. Can a software update fix the U1002 code in my Toyota RAV4?

In some cases, performing a software update on the control modules may help resolve the U1002 code by addressing any compatibility issues or bugs causing the communication error.

9. Is the U1002 code a common issue in 2015 Toyota RAV4 vehicles?

While the U1002 code may not be as common as other OBDII codes, it can still occur in 2015 Toyota RAV4 vehicles due to various factors affecting the vehicle's communication network.

10. How much does it typically cost to repair the U1002 code in a Toyota RAV4?

The cost of repairing the U1002 code in a Toyota RAV4 can vary depending on the underlying cause, parts needed for replacement or repair, labor costs, and whether the repair is done at a dealership or an independent automotive shop.