AutoCodes – Nissan – U1001 2010 Nissan Rogue

U1001 2010 Nissan Rogue Code - Invalid or Missing Data for Primary Id

Quick Answer

The Controller Area Network (CAN) is a serial communication line for real-time applications. Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1001 2010 Nissan Rogue indicates Invalid or Missing Data for Primary Id.
Common causes: Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,917

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 15, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1001 2010 Nissan Rogue Description

The Controller Area Network (CAN) is a serial communication line for real-time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads the required data only.
The Diagnostic Trouble Code (DTC) sets when the Engine Control Module (ECM) is not transmitting or receiving CAN communication signals of OBD (emission-related diagnosis) for 2 seconds or more.

OBDII Code U1001 2010 Nissan Rogue - Invalid or Missing Data for Primary Id - AutoCodes.com — U1001 2010 Nissan Rogue Code - Invalid or Missing Data for Primary Id

What does this mean?

What are the Possible Causes of the DTC U1001 2010 Nissan Rogue?

Controller Area Network (CAN) communication harness is open or shorted
Faulty Engine Control Module (ECM)
Poor harness ground connection.

How to Fix the DTC U1001 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Nissan has released service bulletins for this problem. A common cause with Nissan vehicles is the poor harness ground connection at the engine compartment and the ground connection behind the dash. Clean and resecure harness ground connection and reset engine light.

See U1000 code

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1001 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1001 2010 Nissan Rogue code?

Need more information on how to fix the U1001 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1001 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1001 2010 Nissan Rogue Code

1. What does the OBDII code U1001 on a 2010 Nissan Rogue indicate?

- The U1001 code typically indicates a communication problem between modules in the vehicle, specifically related to invalid or missing data for the primary ID.

2. What are common symptoms of the U1001 code in a 2010 Nissan Rogue?

- Common symptoms include issues with the transmission, rough shifting, poor vehicle performance, and possibly the illumination of the Check Engine light.

3. What are the potential causes of the U1001 code on a 2010 Nissan Rogue?

- The U1001 code can be triggered by damaged wiring or connectors, faulty control modules, software glitches, or issues with the CAN (Controller Area Network) communication system.

4. How can I diagnose the U1001 code on my 2010 Nissan Rogue?

- Diagnosing the U1001 code typically involves using a professional OBDII scanner to retrieve the specific codes stored in the vehicle's computer system and inspecting the wiring and connectors for any visible damage.

5. Can I continue driving my 2010 Nissan Rogue with the U1001 code present?

- It is not recommended to drive the vehicle with the U1001 code present, as it can lead to further damage and potential safety issues. It is best to address the underlying problem as soon as possible.

6. How can I repair the U1001 code on my 2010 Nissan Rogue?

- Repairing the U1001 code may involve fixing any damaged wiring or connectors, replacing faulty control modules, updating software as needed, and ensuring proper communication within the vehicle's network.

7. Will resetting the OBDII code U1001 on my 2010 Nissan Rogue resolve the issue?

- Resetting the code may temporarily clear the Check Engine light, but it will not fix the underlying problem causing the U1001 code. Proper diagnosis and repair are necessary to address the issue effectively.

8. Is the U1001 code specific to the 2010 Nissan Rogue, or can it occur in other vehicles?

- The U1001 code is a generic communication error code that can occur in various vehicles, not just the 2010 Nissan Rogue. It indicates a problem with the communication network within the vehicle.

9. Can a DIY enthusiast without professional experience fix the U1001 code on a 2010 Nissan Rogue?

- While some basic troubleshooting steps can be taken, diagnosing and repairing the U1001 code may require advanced knowledge and specialized tools. It is recommended to seek professional help for accurate diagnosis and repair.

10. How much does it cost to repair the U1001 code on a 2010 Nissan Rogue?

- The cost of repairing the U1001 code can vary depending on the specific underlying issue, parts needed for replacement, labor costs, and whether the repair is done at a dealership or an independent mechanic. It is advisable to obtain quotes from different sources for comparison.