AutoCodes – Nissan – U1000 2007 Nissan Versa

U1000 2007 Nissan Versa Code - CAN Communication Line Signal Malfunction

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1000 2007 Nissan Versa indicates CAN Communication Line Signal Malfunction.
Common causes: Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,498

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1000 2007 Nissan Versa Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when the Engine Control Module (ECM) is not transmitting or receiving CAN communication signals for 2 seconds or more.

OBDII Code U1000 2007 Nissan Versa - CAN Communication Line Signal Malfunction - AutoCodes.com — U1000 2007 Nissan Versa Code - CAN Communication Line Signal Malfunction

What does this mean?

What are the Possible Causes of the DTC U1000 2007 Nissan Versa?

Controller Area Network (CAN) communication harness is open or shorted
Faulty Engine Control Module (ECM)
Poor harness ground connection.

How to Fix the DTC U1000 2007 Nissan Versa?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a service bulletin for the 2007 Nissan Versa:
2007 Nissan Versa Factory Service Bulletin OBDII Code U1000

Usually, the problem is poor harness ground connection. The service bulletin suggests cleaning engine and body harness ground connection to repair the problem. Loosen the ground connectors clean them with sandpaper on the connector side and body side and retighten the bolts back.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1000 2007 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1000 2007 Nissan Versa code?

Need more information on how to fix the U1000 2007 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1000 2007 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1000 2007 Nissan Versa Code

1. What does the OBDII code U1000 on a 2007 Nissan Versa indicate?

The U1000 code specifically points to a CAN communication line signal malfunction in the vehicle.

2. What are some common symptoms of a CAN communication line signal malfunction (U1000) in a 2007 Nissan Versa?

Common symptoms may include issues with the transmission shifting smoothly, the engine stalling, or dashboard warning lights illuminating unexpectedly.

3. What are some possible causes of the U1000 code in a 2007 Nissan Versa?

Possible causes of the U1000 code include damaged wiring or connectors, a faulty CAN bus module, issues with the ECM, or a malfunctioning sensor.

4. How can I diagnose the U1000 code in my 2007 Nissan Versa?

Diagnosing the U1000 code typically involves using an OBDII scanner to retrieve the code, inspecting the wiring and connectors for damage, and testing the various components along the CAN communication line.

5. How can I repair a CAN communication line signal malfunction (U1000) in my 2007 Nissan Versa?

Repairing the U1000 code may require repairing or replacing damaged wiring and connectors, replacing faulty components like the CAN bus module or ECM, and ensuring proper communication between all vehicle systems.

6. Can I drive my 2007 Nissan Versa with the U1000 code present?

It is not recommended to drive your vehicle with the U1000 code present, as it can lead to further issues with the vehicle's performance and safety systems.

7. How much does it typically cost to repair the U1000 code in a 2007 Nissan Versa?

The cost of repairing the U1000 code can vary depending on the specific cause of the issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.

8. Can resetting the OBDII code U1000 on a 2007 Nissan Versa fix the issue?

Simply resetting the code may temporarily clear the warning light, but it will not address the underlying problem causing the CAN communication line signal malfunction.

9. Is it possible to prevent the U1000 code from appearing in my 2007 Nissan Versa?

Regular maintenance, including checking and maintaining the vehicle's wiring and connectors, can help prevent issues that may trigger the U1000 code in your Nissan Versa.

10. Can a DIY enthusiast repair the U1000 code on a 2007 Nissan Versa?

While some may attempt to diagnose and repair the U1000 code themselves, it is recommended to consult with a professional mechanic or technician due to the complexities involved in troubleshooting CAN communication line issues.