AutoCodes – Nissan – U1000 2007 Nissan Maxima

U1000 2007 Nissan Maxima Code - CAN Communication Line Signal Malfunction

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1000 2007 Nissan Maxima indicates CAN Communication Line Signal Malfunction.
Common causes: Common causes include Controller Area Network (CAN) communication harness is open or shorted, Faulty Engine Control Module (ECM), Poor harness ground connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,410

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1000 2007 Nissan Maxima Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when the Engine Control Module (ECM) is not transmitting or receiving CAN communication signals for 2 seconds or more.

OBDII Code U1000 2007 Nissan Maxima - CAN Communication Line Signal Malfunction - AutoCodes.com — U1000 2007 Nissan Maxima Code - CAN Communication Line Signal Malfunction

What does this mean?

What are the Possible Causes of the DTC U1000 2007 Nissan Maxima?

Controller Area Network (CAN) communication harness is open or shorted
Faulty Engine Control Module (ECM)
Poor harness ground connection.

How to Fix the DTC U1000 2007 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a service bulletin for the 2007 Nissan Maxima:
2007 Nissan Maxima Factory Service Bulletin OBDII Code U1000

Usually, the problem is poor harness ground connection. The service bulletin suggests cleaning engine and body harness ground connection to repair the problem. Loosen the ground connectors clean them with sandpaper on the connector side and body side and retighten the bolts back.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1000 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1000 2007 Nissan Maxima code?

Need more information on how to fix the U1000 2007 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1000 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1000 2007 Nissan Maxima Code

1. What does the OBDII code U1000 on a 2007 Nissan Maxima indicate?

The U1000 code on a 2007 Nissan Maxima signals a CAN communication line signal malfunction.

2. What are the common symptoms of a U1000 code in a 2007 Nissan Maxima?

Common symptoms of a U1000 code include issues with the vehicle's network communication system, such as erratic behavior of electronic components, dashboard warning lights, and difficulty starting the vehicle.

3. What are the possible causes of a U1000 code in a 2007 Nissan Maxima?

Potential causes of a U1000 code can include damaged wiring, loose connections, faulty control modules, software issues, or problems with the CAN bus network.

4. How can I diagnose a U1000 code in my 2007 Nissan Maxima?

Diagnosing a U1000 code typically involves using a professional OBDII scanner to read the code, checking the wiring and connections related to the CAN bus system, and performing a thorough inspection of the control modules.

5. Can a U1000 code be fixed by resetting the ECU on a 2007 Nissan Maxima?

While resetting the ECU may temporarily clear the U1000 code, it is crucial to identify and address the underlying issue causing the communication line malfunction to prevent the code from reoccurring.

6. Is it safe to continue driving with a U1000 code in a 2007 Nissan Maxima?

It is not recommended to drive the vehicle with an active U1000 code, as it can lead to further electrical system malfunctions and potentially impact the vehicle's overall performance and safety.

7. How much does it typically cost to repair a U1000 code in a 2007 Nissan Maxima?

The cost of repairing a U1000 code can vary depending on the specific cause of the issue. It is advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.

8. Can a DIY enthusiast fix a U1000 code in a 2007 Nissan Maxima?

While some individuals may have the skills to address basic wiring or connection issues related to a U1000 code, complex diagnostic procedures and repairs may require the expertise of a qualified technician.

9. Will a U1000 code cause the vehicle to fail an emissions test in my 2007 Nissan Maxima?

A U1000 code may trigger a malfunction indicator light (MIL) which can result in a failed emissions test. It is recommended to address the code promptly to avoid potential issues during emissions testing.

10. How long does it take to repair a U1000 code in a 2007 Nissan Maxima?

The duration of the repair process for a U1000 code can vary based on the specific cause of the issue and the availability of replacement parts. It is advisable to consult with a mechanic for a more accurate timeframe.