AutoCodes – Jeep – U0684 Jeep

U0684 Jeep Code - Lost Communication With Catalyst Temperature Bank 1 Sensor 1

Quick Answer

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Common causes include Faulty Catalyst Temperature Bank 1 Sensor 1, Catalyst Temperature Bank 1 Sensor 1 harness is open or shorted, Catalyst Temperature Bank 1 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0684 Jeep indicates Lost Communication With Catalyst Temperature Bank 1 Sensor 1.
Common causes: Common causes include Faulty Catalyst Temperature Bank 1 Sensor 1, Catalyst Temperature Bank 1 Sensor 1 harness is open or shorted, Catalyst Temperature Bank 1 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 507

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0684 Jeep Description

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Catalyst Temperature Bank 1 Sensor 1 has not been received.

OBDII Code U0684 Jeep - Lost Communication With Catalyst Temperature Bank 1 Sensor 1 - AutoCodes.com — U0684 Jeep Code - Lost Communication With Catalyst Temperature Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC U0684 Jeep?

Faulty Catalyst Temperature Bank 1 Sensor 1
Catalyst Temperature Bank 1 Sensor 1 harness is open or shorted
Catalyst Temperature Bank 1 Sensor 1 circuit poor electrical connection

How to Fix the DTC U0684 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0684 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0684 Jeep code?

Need more information on how to fix the U0684 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0684 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0684 Jeep Code

1. What are common symptoms of the OBDII code U0684 in a Jeep related to lost communication with Catalyst Temperature Bank 1 Sensor 1?

- Common symptoms include the Check Engine Light illuminating, poor engine performance, and potential issues with fuel efficiency.

2. What can cause the U0684 code in a Jeep indicating lost communication with Catalyst Temperature Bank 1 Sensor 1?

- The code may be triggered by a faulty sensor, damaged wiring or connectors, a blown fuse, or issues with the Engine Control Module (ECM).

3. How can I diagnose the U0684 code in my Jeep?

- To diagnose the issue, you can use an OBDII scanner to retrieve the code, inspect the wiring and connectors for damage, check the sensor's functionality, and verify the ECM's operation.

4. How do I repair the U0684 code in my Jeep?

- Repair options include replacing the faulty sensor, repairing or replacing damaged wiring or connectors, checking and replacing blown fuses if necessary, and potentially reprogramming the ECM.

5. Can I drive my Jeep with the U0684 code present?

- It is not recommended to drive your Jeep with the U0684 code active, as it can lead to further engine problems and potential damage if not addressed promptly.

6. How serious is the U0684 code in a Jeep?

- While not an immediate safety concern, the U0684 code should be addressed promptly to prevent potential engine performance issues and further damage to the vehicle.

7. How much does it cost to fix the U0684 code in a Jeep?

- The cost of repairing the U0684 code can vary depending on the root cause of the issue, but it may involve sensor replacement, wiring repairs, or ECM reprogramming, which can range from moderate to expensive.

8. Can I reset the U0684 code in my Jeep without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it is not recommended to reset the code without addressing the underlying problem, as it may lead to recurring issues and potential damage to the vehicle.

9. Are there any DIY solutions for fixing the U0684 code in a Jeep?

- Depending on your automotive skills, you may attempt DIY solutions such as checking and cleaning sensor connectors, inspecting wiring for damage, and replacing the sensor if needed.

10. Will the U0684 code cause my Jeep to fail an emissions test?

- Yes, the U0684 code indicating lost communication with Catalyst Temperature Bank 1 Sensor 1 can cause your Jeep to fail an emissions test, as it affects the proper functioning of emission control systems.