AutoCodes – Ford – U0428 Ford

U0428 Ford Code - Invalid Data Received From Steering Angle Sensor Module

Quick Answer

The Steering Angle Sensor Module (SASM) broadcasts the absolute steering angle value to the Power Steering Control Module (PSCM) over the HS-CAN at predefined intervals during every drive cycle from the first ignition ON status. Common causes include Faulty Steering Angle Sensor Module (SASM), Steering Angle Sensor Module harness is open or shorted, Steering Angle Sensor Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0428 Ford indicates Invalid Data Received From Steering Angle Sensor Module.
Common causes: Common causes include Faulty Steering Angle Sensor Module (SASM), Steering Angle Sensor Module harness is open or shorted, Steering Angle Sensor Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,341

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 11, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0428 Ford Description

The Steering Angle Sensor Module (SASM) broadcasts the absolute steering angle value to the Power Steering Control Module (PSCM) over the HS-CAN at predefined intervals during every drive cycle from the first ignition ON status. During normal operation the absolute steering angle from the SASM is compared against a steering angle derived from the rear wheel speed values broadcast by the ABS module over the HS-CAN and an angle derived from the EPAS motor position. If the absolute steering angle values and the derived steering angles do not match, the EPAS system is set to a default level of assistance. The invalid data Diagnostic Trouble Code (DTC) will be set when a receiving device detects a discrepancy in the information it receives from the Steering Angle Sensor Module causing its integrity to be questioned.

OBDII Code U0428 Ford - Invalid Data Received From Steering Angle Sensor Module - AutoCodes.com — U0428 Ford Code - Invalid Data Received From Steering Angle Sensor Module

What does this mean?

What are the Possible Causes of the DTC U0428 Ford?

Faulty Steering Angle Sensor Module (SASM)
Steering Angle Sensor Module harness is open or shorted
Steering Angle Sensor Module circuit poor electrical connection

How to Fix the DTC U0428 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0428 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0428 Ford code?

Need more information on how to fix the U0428 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0428 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0428 Ford Code

1. What does the OBDII code U0428 mean on a Ford vehicle?

The code U0428 indicates that the vehicleâ€™s control module has received invalid or corrupted data from the steering angle sensor module.

2. What are common symptoms of the U0428 code in a Ford?

Symptoms may include the activation of the check engine light, malfunction indicator lights related to stability or traction control, and erratic steering behavior.

3. What causes the U0428 code to appear in a Ford vehicle?

Common causes include a faulty steering angle sensor, damaged wiring or connectors, software issues in the control module, or calibration errors.

4. Can I drive my Ford with the U0428 code active?

While the vehicle may still be drivable, issues with the steering angle sensor could impact safety systems like traction control or stability assist, so itâ€™s best to address the issue promptly.

5. How can I fix the U0428 code on my Ford?

Start by inspecting the wiring and connectors for damage or corrosion. If no issues are found, consider recalibrating or replacing the steering angle sensor.

6. Do I need to replace the steering angle sensor to fix U0428?

Not always. Sometimes recalibrating the sensor or repairing damaged wiring can resolve the issue without replacement.

7. Can a low battery cause the U0428 code in my Ford?

Yes, a weak or failing battery can cause communication errors between modules, potentially triggering the U0428 code.

8. How do I recalibrate the steering angle sensor in a Ford?

Recalibration typically requires a diagnostic scan tool with the proper software to reset and align the sensor values to factory settings.

9. Is the U0428 code related to the ABS or traction control system?

Yes, the steering angle sensor is a critical component for systems like ABS, traction control, and stability control, so the U0428 code can affect their functionality.

10. What happens if I ignore the U0428 code in my Ford vehicle?

Ignoring this code could lead to compromised safety system performance, including reduced traction and stability control, potentially increasing the risk of an accident.