U0402 Jeep Code - Invalid Data Received From Transmission Control Module
Quick Answer
A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0402 Jeep indicates Invalid Data Received From Transmission Control Module.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U0402 Jeep Description
What are the Possible Causes of the DTC U0402 Jeep?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC U0402 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U0402 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U0402 Jeep code?
Need more information on how to fix the U0402 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0402 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0402 Jeep Code
1. What are the common symptoms of OBDII code U0402 (Invalid Data Received From Transmission Control Module) in a Jeep?
- Common symptoms include transmission shifting issues, stalling, poor acceleration, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code U0402 in a Jeep?
- The code U0402 can be triggered by issues such as a faulty transmission control module (TCM), damaged wiring or connectors, software glitches, or communication network failures.
3. How can I diagnose OBDII code U0402 on my Jeep?
- Diagnosing code U0402 typically involves using an OBDII scanner to retrieve the code, checking for any related codes, inspecting the TCM and related components, and performing a thorough inspection of the wiring and connectors.
4. Can I continue driving my Jeep with OBDII code U0402?
- It is not recommended to continue driving your Jeep with code U0402 present, as it can lead to further damage to the transmission or other components. It's best to address the issue promptly.
5. What are some repair tips for fixing OBDII code U0402 in a Jeep?
- Repair tips may include checking and repairing any damaged wiring or connectors, reprogramming the TCM if necessary, and ensuring all software updates are applied.
6. Is it possible to clear OBDII code U0402 in a Jeep without fixing the underlying issue?
- Clearing the code without addressing the underlying issue may temporarily turn off the Check Engine Light, but the problem will likely resurface. It's important to diagnose and fix the root cause of the code.
7. Can a DIY enthusiast repair OBDII code U0402 in a Jeep?
- While some aspects of diagnosing and repairing code U0402 may be within reach of a skilled DIY enthusiast, dealing with transmission control module issues may require specialized tools and expertise best handled by a professional mechanic.
8. How much does it typically cost to repair OBDII code U0402 in a Jeep?
- The cost of repairing code U0402 can vary depending on the underlying issue, parts required, labor rates, and whether the repair is done at a dealership or an independent repair shop. Costs can range from a few hundred to over a thousand dollars.
9. Are there any preventive measures to avoid OBDII code U0402 in a Jeep?
- Regular maintenance, such as keeping the transmission system in good condition, checking for any signs of wiring damage, and promptly addressing any warning lights, can help reduce the likelihood of experiencing code U0402.
Discuss the causes and fixes for U0402 Jeep OBDII Code
Code U0402 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
