U0401 Chrysler Code - Invalid Data Received From ECM/PCM
Quick Answer
Sensor information and other calculated data that is processed by an Electronic Control Module (ECU) can be transmitted over the Controller Area Network (CAN). Common causes include Faulty Electronic Control Module (ECU) (The ECU that sets the DTC, For example, TCM or ABS Module), Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0401 Chrysler indicates Invalid Data Received From ECM/PCM.
- Common causes
- Common causes include Faulty Electronic Control Module (ECU) (The ECU that sets the DTC, For example, TCM or ABS Module), Faulty Powertrain Control Module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U0401 Chrysler Description
If the transmitting ECU knows that the data is not valid, it will transmit a CAN message indicating that the information is not valid or not available. Often, this message is known as a Signal Not Available (SNA) message.
When a SNA message is transmitted, a Diagnostic Trouble Code (DTC) will be set in the receiving ECU.
If a SNA message is received, this indicates that the transmitting ECU cannot transmit good data relative to the information that it was supposed to send. Typically, the transmitting ECU will also have a DTC set related to that information. Therefore, in most cases, this DTC is considered informational because the error is related to another ECU.
What are the Possible Causes of the DTC U0401 Chrysler?
- Faulty Electronic Control Module (ECU) (The ECU that sets the DTC. For example, TCM or ABS Module)
- Faulty Powertrain Control Module (PCM)
- Powertrain Control Module harness is open or shorted
- Powertrain Control Module circuit poor electrical connection
How to Fix the DTC U0401 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U0401 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U0401 Chrysler code?
Need more information on how to fix the U0401 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0401 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0401 Chrysler Code
1. What are the common symptoms of OBDII code U0401 in a Chrysler vehicle?
- Common symptoms include the check engine light illuminating, poor engine performance, stalling or rough idling, and issues with the transmission.
2. What does the OBDII code U0401 Chrysler mean?
- The code U0401 indicates that the vehicle's Engine Control Module (ECM) or Powertrain Control Module (PCM) has detected invalid data communication from one of the control modules.
3. What are the possible causes of the U0401 code in a Chrysler vehicle?
- Possible causes include a faulty ECM or PCM, damaged wiring or connectors, software issues, a weak battery, or problems with other control modules in the vehicle.
4. How can I diagnose the U0401 code in my Chrysler vehicle?
- Diagnosing the U0401 code typically involves using a scan tool to read the code, inspecting the wiring and connectors for damage, checking the battery voltage, and performing tests on various control modules.
5. Can I still drive my Chrysler vehicle with the U0401 code present?
- It is not recommended to drive the vehicle with the U0401 code present, as it can lead to further damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair the U0401 code in my Chrysler vehicle?
- Repair options may include replacing the ECM or PCM, repairing damaged wiring or connectors, updating software, ensuring a strong battery connection, and addressing issues with other control modules.
7. Will resetting the check engine light make the U0401 code go away?
- Resetting the check engine light may temporarily clear the code, but if the underlying issue causing the U0401 code is not addressed, the code is likely to reappear.
8. Can a DIY enthusiast fix the U0401 code issue in a Chrysler vehicle?
- Depending on the cause of the U0401 code, some DIY enthusiasts with the necessary tools and knowledge may be able to address the issue. However, complex issues may require professional diagnosis and repair.
9. How much does it cost to repair the U0401 code in a Chrysler vehicle?
- The cost of repairing the U0401 code can vary depending on the underlying cause, parts needed, labor rates, and whether the repair is done at a dealership or an independent mechanic.
10. Is the U0401 code a common issue in Chrysler vehicles?
- The U0401 code is not uncommon in Chrysler vehicles, especially in older models or vehicles with high mileage. Regular maintenance and prompt attention to warning lights can help prevent this issue.
Discuss the causes and fixes for U0401 Chrysler OBDII Code
Code U0401 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
