AutoCodes – Toyota – U0232 Toyota

U0232 Toyota Code - Lost Communication with Blind Spot Monitor Slave Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Blind Spot Monitor Slave Module, Blind Spot Monitor Slave Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0232 Toyota indicates Lost Communication with Blind Spot Monitor Slave Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Blind Spot Monitor Slave Module, Blind Spot Monitor Slave Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,815

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0232 Toyota Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Blind Spot Monitor Slave Module has not been received.

OBDII Code U0232 Toyota - Lost Communication with Blind Spot Monitor Slave Module - AutoCodes.com — U0232 Toyota Code - Lost Communication with Blind Spot Monitor Slave Module

What does this mean?

What are the Possible Causes of the DTC U0232 Toyota?

Faulty Controller Area Network (CAN) Communication System
Faulty Blind Spot Monitor Slave Module
Blind Spot Monitor Slave Module harness is open or shorted
Blind Spot Monitor Slave Module circuit poor electrical connection

How to Fix the DTC U0232 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0232 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0232 Toyota code?

Need more information on how to fix the U0232 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0232 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

U0232 2013 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module
U0232 2014 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module
U0232 2015 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module
U0232 2016 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module
U0232 2017 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module
U0232 2018 Toyota RAV4 — Lost Communication with Blind Spot Monitor Slave Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0232 Toyota Code

1. What does OBDII code U0232 mean on a Toyota?

Code U0232 indicates a loss of communication with the Blind Spot Monitor (BSM) Slave Module, meaning the module is not responding to requests from the vehicle's main control systems.

2. What are the common symptoms of code U0232 on a Toyota?

Symptoms may include the Blind Spot Monitor system not functioning, warning lights on the dashboard (such as the BSM or check engine light), and potentially a lack of alerts for vehicles in blind spots.

3. What causes the U0232 code on a Toyota?

Common causes include a faulty Blind Spot Monitor Slave Module, damaged or corroded wiring/connectors in the communication circuit, or software issues with the module.

4. Can I still drive my Toyota with a U0232 code?

Yes, you can drive your vehicle, but the Blind Spot Monitor system may not function properly, increasing the risk of accidents during lane changes.

5. How do I diagnose the U0232 code on a Toyota?

Use an OBDII scanner to confirm the code, inspect the wiring and connectors related to the BSM Slave Module, and ensure the module is receiving proper power and ground signals.

6. How can I fix the U0232 code on a Toyota?

Repairs may involve reconnecting or replacing damaged wiring, cleaning corroded connectors, updating the module software, or replacing the Blind Spot Monitor Slave Module if it is defective.

7. How much does it cost to fix a U0232 code on a Toyota?

Repair costs vary depending on the issue, ranging from $50–$150 for minor wiring repairs to $500 or more if the Blind Spot Monitor Slave Module needs replacement.

8. Can a weak battery cause the U0232 code on a Toyota?

Yes, a weak or failing battery can lead to communication issues between modules, potentially triggering the U0232 code.

9. Will clearing the U0232 code fix the issue on my Toyota?

Clearing the code may temporarily remove the warning, but if the underlying problem is not resolved, the code will likely return.

10. Is the U0232 code covered under warranty for my Toyota?

It depends on your vehicle’s warranty terms. If your Toyota is still under warranty and the issue is related to a defective Blind Spot Monitor module, it may be covered.