AutoCodes – Generic – U0232

U0232 Code - Lost Communication with Blind Spot Monitor Slave Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Blind Spot Monitor Slave Module, Blind Spot Monitor Slave Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0232 indicates Lost Communication with Blind Spot Monitor Slave Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Blind Spot Monitor Slave Module, Blind Spot Monitor Slave Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,723

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0232 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Blind Spot Monitor Slave Module has not been received.

OBDII Code U0232 - Lost Communication with Blind Spot Monitor Slave Module - AutoCodes.com — U0232 Code - Lost Communication with Blind Spot Monitor Slave Module

What does this mean?

What are the Possible Causes of the DTC U0232?

Faulty Controller Area Network (CAN) Communication System
Faulty Blind Spot Monitor Slave Module
Blind Spot Monitor Slave Module harness is open or shorted
Blind Spot Monitor Slave Module circuit poor electrical connection

How to Fix the DTC U0232?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0232 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0232 code?

Need more information on how to fix the U0232 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0232 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

U0232 Buick — Lost Communication With Left Side Object Detection Control Module
U0232 Cadillac — Lost Communication With Left Side Object Detection Control Module
U0232 Chevrolet — Lost Communication With Left Side Object Detection Control Module
U0232 GMC — Lost Communication With Left Side Object Detection Control Module
U0232 Lexus — Lost Communication with Blind Spot Monitor Slave Module
U0232 Toyota — Lost Communication with Blind Spot Monitor Slave Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0232 Code

1. What are the common symptoms of OBDII code U0232 (Lost Communication with Blind Spot Monitor Slave Module)?

- Common symptoms include the blind spot monitor not functioning properly, warning lights on the dashboard, and potential loss of other related safety features.

2. What can cause OBDII code U0232 to trigger?

- The code U0232 is typically triggered by wiring issues, loose connections, a faulty blind spot monitor slave module, or a problem with the vehicle's network communication system.

3. How can I diagnose the cause of OBDII code U0232?

- Diagnosing the issue involves checking the wiring and connections related to the blind spot monitor slave module, utilizing a scan tool to assess the communication network, and testing the module itself for faults.

4. What are some repair tips for fixing OBDII code U0232?

- Repair tips include inspecting and repairing any damaged or loose wiring, ensuring all connections are secure, replacing the blind spot monitor slave module if necessary, and clearing the code with a scan tool after repairs are made.

5. Can OBDII code U0232 be fixed without professional help?

- While some basic checks like ensuring connections are secure can be done without professional help, diagnosing and repairing the underlying causes of the code may require advanced diagnostic tools and expertise.

6. Is it safe to drive with OBDII code U0232 present?

- It is not recommended to drive with the code U0232 present, as it indicates a potential issue with critical safety systems like the blind spot monitor. It's best to address the problem promptly.

7. How much does it typically cost to repair OBDII code U0232?

- The cost of repairs for OBDII code U0232 can vary depending on the underlying cause, but it may involve expenses for parts replacement, labor, and diagnostic services.

8. Can a low vehicle battery cause OBDII code U0232 to trigger?

- A low vehicle battery can potentially affect the vehicle's network communication system and lead to the triggering of code U0232. Ensuring the battery is in good condition is important for proper system operation.

9. Will disconnecting the battery reset OBDII code U0232?

- Disconnecting the battery may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the problem again.

10. How long does it take to repair OBDII code U0232?

- The repair time for OBDII code U0232 can vary depending on the complexity of the issue and the availability of parts. It's advisable to consult with a professional technician for a more accurate estimate.