AutoCodes – Toyota – U0163 2017 Toyota RAV4

U0163 2017 Toyota RAV4 Code - Lost Communication with Navigation Control Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Navigation Control Module, Navigation Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0163 2017 Toyota RAV4 indicates Lost Communication with Navigation Control Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Navigation Control Module, Navigation Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 333

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 27, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0163 2017 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Navigation Control Module has not been received.

OBDII Code U0163 2017 Toyota RAV4 - Lost Communication with Navigation Control Module - AutoCodes.com — U0163 2017 Toyota RAV4 Code - Lost Communication with Navigation Control Module

What does this mean?

What are the Possible Causes of the DTC U0163 2017 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Navigation Control Module
Navigation Control Module harness is open or shorted
Navigation Control Module circuit poor electrical connection

How to Fix the DTC U0163 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0163 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0163 2017 Toyota RAV4 code?

Need more information on how to fix the U0163 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0163 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0163 2017 Toyota RAV4 Code

1. What are the common symptoms of OBDII code U0163 in a 2017 Toyota RAV4?

- Common symptoms include the navigation system not functioning properly, the screen going blank, and error messages related to the navigation control module.

2. What does the OBDII code U0163 indicate in a 2017 Toyota RAV4?

- The code U0163 signifies a communication problem between the vehicle's onboard computer system and the navigation control module.

3. What are the possible causes of the U0163 code in a 2017 Toyota RAV4?

- Possible causes include a faulty navigation control module, wiring issues, loose connections, or a software glitch in the navigation system.

4. How can I diagnose the U0163 code in my 2017 Toyota RAV4?

- Diagnose the U0163 code by checking the wiring connections to the navigation control module, scanning for other related trouble codes, and performing a system reset on the navigation unit.

5. Can I still drive my 2017 Toyota RAV4 with the U0163 code present?

- Yes, you can still drive your vehicle with the U0163 code; however, it is recommended to address the issue promptly to avoid potential navigation system malfunctions.

6. How can I repair the U0163 code in my 2017 Toyota RAV4?

- Repair options include replacing the navigation control module if faulty, repairing any damaged wiring, ensuring all connections are secure, and updating the navigation system software.

7. Will resetting the navigation system fix the U0163 code in my 2017 Toyota RAV4?

- Resetting the navigation system may help clear the U0163 code temporarily, but if the underlying issue persists, further diagnosis and repairs may be necessary.

8. How much does it cost to fix the U0163 code in a 2017 Toyota RAV4?

- The cost to fix the U0163 code can vary depending on the specific issue causing the communication error. Costs may include parts, labor, and diagnostic fees.

9. Is the U0163 code a common issue in 2017 Toyota RAV4 vehicles?

- While not extremely common, the U0163 code can occur in 2017 Toyota RAV4 models due to communication issues between the vehicle's systems and the navigation control module.

10. Can I clear the U0163 code on my 2017 Toyota RAV4 using an OBDII scanner?

- Yes, an OBDII scanner can be used to clear the U0163 code; however, it is important to address the root cause of the issue to prevent the code from reappearing.