U0160 Buick Code - Lost Communication With Chime Alarm Control Module
Quick Answer
Modules connected to the high speed General Motor Local Area Network (GMLAN) serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Chime Alarm Control Module, Chime Alarm Control Module harness is open or shorted, Chime Alarm Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0160 Buick indicates Lost Communication With Chime Alarm Control Module.
- Common causes
- Common causes include Faulty Chime Alarm Control Module, Chime Alarm Control Module harness is open or shorted, Chime Alarm Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U0160 Buick Description
What are the Possible Causes of the DTC U0160 Buick?
- Faulty Chime Alarm Control Module
- Chime Alarm Control Module harness is open or shorted
- Chime Alarm Control Module circuit poor electrical connection
How to Fix the DTC U0160 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U0160 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U0160 Buick code?
Need more information on how to fix the U0160 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0160 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0160 Buick Code
1. What does the OBDII code U0160 mean for a Buick?
The U0160 code indicates a "Lost Communication With Chime Alarm Control Module," meaning the vehicle's systems cannot communicate with the Chime Alarm Control Module (CACM).
2. What are the common symptoms of the U0160 code on a Buick?
Symptoms may include malfunctioning chimes or warning sounds, dashboard warning lights, or a lack of audible alerts for doors, seatbelts, or other systems.
3. What causes the U0160 code on a Buick?
Common causes include a faulty Chime Alarm Control Module, damaged wiring or connectors, a blown fuse, or issues with the CAN (Controller Area Network) communication system.
4. Can a blown fuse trigger the U0160 code on a Buick?
Yes, a blown fuse related to the Chime Alarm Control Module or CAN communication system can cause the U0160 code.
5. How can I diagnose the U0160 code on my Buick?
Start by checking for damaged or loose wiring and connectors, inspecting fuses, and using a scan tool to test CAN communication and module functionality.
6. Is the Chime Alarm Control Module likely to need replacement if the U0160 code appears?
Not always. While the module can fail, the issue may also stem from wiring, fuses, or network communication problems that should be checked first.
7. Can driving with the U0160 code cause further issues for my Buick?
While it may not immediately affect drivability, losing communication with the Chime Alarm Control Module could compromise safety alerts and warnings, which are important for safe operation.
8. How much does it cost to fix the U0160 code on a Buick?
Repair costs vary, but diagnosing and repairing wiring or connectors may cost $100–$300, while replacing the Chime Alarm Control Module could cost $200–$600, depending on labor and parts.
9. Can a software issue cause the U0160 code in a Buick?
Yes, a software glitch in the Chime Alarm Control Module or other system modules can sometimes trigger the U0160 code.
10. Should I clear the U0160 code after repairs?
Yes, after completing repairs, clear the code with an OBDII scan tool and test-drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for U0160 Buick OBDII Code
Code U0160 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
