AutoCodes – Toyota – U0140 2014 Toyota RAV4

U0140 2014 Toyota RAV4 Code - Lost Communication with Main Body ECU

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Main Body ECU, Main Body ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0140 2014 Toyota RAV4 indicates Lost Communication with Main Body ECU.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Main Body ECU, Main Body ECU harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 267

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 26, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0140 2014 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Main Body ECU has not been received.

Pictures shown may vary from actual

OBDII Code U0140 2014 Toyota RAV4 - Lost Communication with Main Body ECU - AutoCodes.com — U0140 2014 Toyota RAV4 Code - Lost Communication with Main Body ECU

What does this mean?

What are the Possible Causes of the DTC U0140 2014 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Main Body ECU
Main Body ECU harness is open or shorted
Main Body ECU circuit poor electrical connection

How to Fix the DTC U0140 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0140 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0140 2014 Toyota RAV4 code?

Need more information on how to fix the U0140 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0140 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0140 2014 Toyota RAV4 Code

1. What does the OBDII code U0140 mean for a 2014 Toyota RAV4?

The code U0140 indicates a "Lost Communication with Main Body ECU" error in the vehicle's onboard diagnostics system.

2. What are the common symptoms of the U0140 code in a 2014 Toyota RAV4?

Common symptoms include issues with power door locks, interior lights not working properly, malfunctioning dashboard lights or gauges, and problems with the vehicle's keyless entry system.

3. What are the possible causes of the U0140 code in a 2014 Toyota RAV4?

Potential causes of the U0140 code include a faulty Main Body ECU, damaged wiring or connectors in the communication network, a weak or dead battery, or a software glitch in the ECU.

4. How can I diagnose the U0140 code in my 2014 Toyota RAV4?

Diagnosis typically involves using a professional OBDII scanner to read and interpret the code, checking the wiring and connectors for any visible damage, and conducting tests to identify the specific cause of the communication failure.

5. How can I repair the U0140 code in my 2014 Toyota RAV4?

Repair options may include repairing or replacing damaged wiring and connectors, reprogramming or replacing the Main Body ECU, checking and replacing the vehicle's battery if needed, and clearing the error code from the system.

6. Can I continue driving my 2014 Toyota RAV4 with the U0140 code present?

It is not recommended to drive the vehicle with the U0140 code active, as it can lead to further electrical issues and potential safety hazards. It's best to address the problem promptly.

7. How much does it typically cost to repair the U0140 code in a 2014 Toyota RAV4?

The cost of repair can vary depending on the specific cause of the issue, the parts needed, and labor costs. It is advisable to consult with a qualified mechanic or dealership for an accurate estimate.

8. Can the U0140 code in a 2014 Toyota RAV4 be fixed at home?

Some basic troubleshooting steps, such as checking wiring connections or resetting the ECU, can be attempted at home. However, more complex repairs or ECU reprogramming may require professional assistance.

9. Will disconnecting the battery reset the U0140 code in my 2014 Toyota RAV4?

Disconnecting the battery might temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the communication problem again.

10. Is the U0140 code a common issue in 2014 Toyota RAV4 vehicles?

While not extremely common, the U0140 code can occur in 2014 Toyota RAV4 models due to various factors, such as electronic component failures, wiring issues, or software glitches.