AutoCodes – Nissan – U0140 2010 Nissan Versa

U0140 2010 Nissan Versa Code - Lost Communication With Body Control Module

Quick Answer

The Controller Area Network (CAN) is a serial communication line for real time applications. Common causes include CAN communication line between Body Control Module (BCM) and Engine Control Module (ECM), Faulty Body Control Module (BCM), Body Control Module (BCM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0140 2010 Nissan Versa indicates Lost Communication With Body Control Module.
Common causes: Common causes include CAN communication line between Body Control Module (BCM) and Engine Control Module (ECM), Faulty Body Control Module (BCM), Body Control Module (BCM) harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,039

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 01, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0140 2010 Nissan Versa Description

The Controller Area Network (CAN) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads the required data only. The Diagnostic Trouble Code (DTC) sets when the Engine Control Module (ECM) is not transmitting or receiving CAN communication signal of OBDII (emission related diagnosis) with Body Control Module (BCM) for 2 seconds or more.

OBDII Code U0140 2010 Nissan Versa - Lost Communication With Body Control Module - AutoCodes.com — U0140 2010 Nissan Versa Code - Lost Communication With Body Control Module

What does this mean?

What are the Possible Causes of the DTC U0140 2010 Nissan Versa?

CAN communication line between Body Control Module (BCM) and Engine Control Module (ECM)
Faulty Body Control Module (BCM)
Body Control Module (BCM) harness is open or shorted
Body Control Module (BCM) circuit poor electrical connection

How to Fix the DTC U0140 2010 Nissan Versa?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0140 2010 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0140 2010 Nissan Versa code?

Need more information on how to fix the U0140 2010 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0140 2010 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0140 2010 Nissan Versa Code

1. What does the OBDII code U0140 mean on a 2010 Nissan Versa?

- The code U0140 indicates a "Lost Communication With Body Control Module" error in the vehicle's onboard diagnostics system.

2. What are the common symptoms of a U0140 code on a 2010 Nissan Versa?

- Common symptoms include issues with power windows, door locks, interior lights, and other body control functions not working properly.

3. What are the potential causes of a U0140 code on a 2010 Nissan Versa?

- The code may be triggered by a faulty body control module, wiring issues, a blown fuse, a disconnected connector, or a software glitch.

4. How can I diagnose a U0140 code on my 2010 Nissan Versa?

- Diagnosing the issue may involve checking the body control module for power and ground, inspecting wiring and connectors for damage, and using a scan tool to communicate with the module.

5. Can a U0140 code be fixed without professional help on a 2010 Nissan Versa?

- While some basic checks like inspecting fuses and connectors can be done by DIY enthusiasts, diagnosing and repairing the root cause of the U0140 code may require professional assistance.

6. Are there any quick fixes for a U0140 code on a 2010 Nissan Versa?

- Quick fixes like checking and resetting the body control module by disconnecting the battery may temporarily clear the code, but it's important to address the underlying issue for a permanent solution.

7. Is it safe to continue driving with a U0140 code on a 2010 Nissan Versa?

- It's not recommended to drive the vehicle with a U0140 code present, as it can affect the proper functioning of essential body control systems, compromising safety and convenience.

8. How much does it typically cost to repair a U0140 code on a 2010 Nissan Versa?

- The cost of repairing a U0140 code can vary depending on the cause of the issue. It's advisable to get a professional diagnosis to determine the exact repair cost.

9. Can a U0140 code on a 2010 Nissan Versa cause other problems if left unfixed?

- Ignoring a U0140 code can lead to further issues with body control functions, potentially impacting the overall operation and convenience of the vehicle.

10. How long does it usually take to repair a U0140 code on a 2010 Nissan Versa?

- The repair time for a U0140 code can vary based on the specific cause of the issue. Some repairs may be quick, while others might require more time for diagnosis and part replacement.