AutoCodes – Ford – U0013 Ford

U0013 Ford Code - Medium Speed CAN Communication Bus (+) Low

Quick Answer

Multiplexing is a method of sending 2 or more signals simultaneously over a single circuit. Common causes include Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s), Check for more codes, Faulty Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0013 Ford indicates Medium Speed CAN Communication Bus (+) Low.
Common causes: Common causes include Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s), Check for more codes, Faulty Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,713

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0013 Ford Description

Multiplexing is a method of sending 2 or more signals simultaneously over a single circuit. Multiplexing allows 2 or more electronic modules (nodes) to communicate over a twisted wire pair [data (+) and data (-)] network. The information or messages that can be communicated on these wires consists of commands, status or data. Multiplexing reduces the weight of the vehicle by reducing the number of redundant components and electrical wiring. The vehicle has 4 module communication networks connected to the DLC, located under the instrument panel. The communication networks are: HEV High Speed Controller Area Network (HS-CAN), High Speed Controller Area Network (HS-CAN), Medium Speed Controller Area Network (MS-CAN) and Infotainment Controller Area Network (I-CAN). The Diagnostic Trouble Code (DTC) U0013 sets when a Medium Speed Controller Area Network (MS-CAN) fault is either currently present or was present at a point in time. The BCM can report this DTC while a fault is present because the BCM communicates with the scan tool on the High Speed Controller Area Network (HS-CAN).

OBDII Code U0013 Ford - Medium Speed CAN Communication Bus (+) Low - AutoCodes.com — U0013 Ford Code - Medium Speed CAN Communication Bus (+) Low

What does this mean?

What are the Possible Causes of the DTC U0013 Ford?

Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s)
Check for more codes
Faulty Control Module
Control Module harness is open or shorted
Control Module circuit poor electrical connection

How to Fix the DTC U0013 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0013 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0013 Ford code?

Need more information on how to fix the U0013 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0013 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0013 Ford Code

1. What is OBDII code U0013 for Ford?

- OBDII code U0013 for Ford refers to the Medium Speed CAN Communication Bus (+) Low fault.

2. What are the common symptoms of OBDII code U0013 in a Ford vehicle?

- Common symptoms of U0013 may include issues with the vehicle's communication system, such as intermittent or complete loss of communication with various control modules.

3. What are the potential causes of OBDII code U0013 in a Ford car?

- The U0013 code in a Ford vehicle can be caused by wiring issues, faulty connectors, problems with the CAN bus system, or a malfunctioning control module.

4. How can I diagnose and repair OBDII code U0013 in my Ford vehicle?

- To diagnose and repair U0013, you may need to inspect the wiring harness, connectors, and CAN bus system for any faults or damage. Checking control modules for proper functioning is also recommended.

5. Can OBDII code U0013 in a Ford vehicle cause any serious issues?

- While U0013 may not directly affect the drivability of the vehicle, it can lead to communication problems with crucial control modules, potentially impacting the overall performance and safety systems.

6. Is it safe to continue driving with OBDII code U0013 present in a Ford car?

- It is generally not recommended to drive with unresolved U0013 code as it may lead to further communication issues and potentially affect the vehicle's overall performance and safety features.

7. How do I reset the OBDII code U0013 in my Ford vehicle?

- Resetting the U0013 code can be done using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the error code.

8. Can a DIY enthusiast fix OBDII code U0013 in a Ford vehicle?

- While some enthusiasts may be able to diagnose and repair U0013 themselves by checking wiring and connectors, complex issues with the CAN bus system may require professional assistance.

9. How much does it cost to repair OBDII code U0013 in a Ford car?

- The cost of repairing U0013 in a Ford vehicle can vary depending on the underlying cause, parts needed, and labor costs, ranging from a few hundred to a few thousand dollars.

10. Are there any preventive measures to avoid OBDII code U0013 in a Ford vehicle?

- Regularly checking the vehicle's wiring harness, connectors, and control modules for any signs of wear or damage can help prevent issues like U0013 from occurring.