P3435 Jeep Code - Cylinder 5 Deactivation Control Circuit Low
Quick Answer
When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3435 Jeep indicates Cylinder 5 Deactivation Control Circuit Low.
- Common causes
- Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P3435 Jeep Description
What are the Possible Causes of the DTC P3435 Jeep?
- Low oil pressure
- Restricted oil passage
- Engine mechanical condition
- Faulty Multiple Displacement System (MDS) Solenoid
- Multiple Displacement System (MDS) Solenoid harness is open or shorted
- Multiple Displacement System (MDS) Solenoid circuit poor electrical connection
How to Fix the DTC P3435 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P3435 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P3435 Jeep code?
Need more information on how to fix the P3435 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3435 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3435 Jeep Code
What does the OBDII code P3435 mean for a Jeep?
The P3435 code indicates a problem with the Cylinder 5 Deactivation Control Circuit, specifically a low voltage or signal issue.
What are the common symptoms of code P3435 on a Jeep?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, or the Check Engine Light being illuminated.
What causes the P3435 code on a Jeep?
Common causes include faulty wiring or connectors in the Cylinder 5 deactivation circuit, a malfunctioning solenoid, or an issue with the engine control module (ECM).
Can driving with code P3435 damage my Jeep?
Driving with this code may cause additional stress on the engine and decrease performance, so it's best to resolve the issue promptly to avoid further damage.
How can I diagnose the P3435 code on a Jeep?
Start by inspecting the wiring and connectors for damage, testing the Cylinder 5 deactivation solenoid, and using a scan tool to monitor live data from the ECM.
What tools are needed to repair code P3435 on a Jeep?
You may need a multimeter to check electrical connections, a scan tool for diagnostics, and basic hand tools to access and replace components.
How much does it cost to fix code P3435 on a Jeep?
Repair costs vary depending on the issue but can range from $50 for minor wiring repairs to several hundred dollars if the solenoid or ECM needs replacement.
Is the Cylinder 5 deactivation solenoid a common failure point for code P3435?
Yes, the solenoid is often a culprit, as it can fail mechanically or electrically, preventing proper cylinder deactivation.
Can I reset the P3435 code on my Jeep without fixing the problem?
You can clear the code with a scan tool, but if the underlying issue isn’t resolved, the code will likely return.
What should I do if the P3435 code keeps reappearing after repairs?
Double-check the wiring, solenoid, and ECM connections, and consider seeking professional assistance to ensure all components are functioning properly.
Discuss the causes and fixes for P3435 Jeep OBDII Code
Code P3435 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
