AutoCodes – Jeep – P3410 Jeep

P3410 Jeep Code - Cylinder 2 Deactivation Control Performance

Quick Answer

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P3410 Jeep indicates Cylinder 2 Deactivation Control Performance.
Common causes: Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,359

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 05, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P3410 Jeep Description

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. By actuating the solenoid, oil pressure is raised to the pair of lifter that coincide with each particular solenoid. The oil pressure pushes in the locking pins that allows the lifter to collapse, decoupling the valves and camshafts.

OBDII Code P3410 Jeep - Cylinder 2 Deactivation Control Performance - AutoCodes.com — P3410 Jeep Code - Cylinder 2 Deactivation Control Performance

What does this mean?

What are the Possible Causes of the DTC P3410 Jeep?

Low oil pressure
Restricted oil passage
Engine mechanical condition
Faulty Multiple Displacement System (MDS) Solenoid
Multiple Displacement System (MDS) Solenoid harness is open or shorted
Multiple Displacement System (MDS) Solenoid circuit poor electrical connection

How to Fix the DTC P3410 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Although in some cases changing the engine oil may fix the problem, usually the Multi Displacement System Solenoid may need to replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3410 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3410 Jeep code?

Need more information on how to fix the P3410 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3410 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3410 Jeep Code

1. What does the OBDII code P3410 mean for a Jeep?

P3410 indicates a Cylinder 2 Deactivation Control Performance issue, meaning the engine control module (ECM) has detected a problem with the activation or deactivation of cylinder 2 during variable displacement operation.

2. What are the common symptoms of code P3410 in a Jeep?

Symptoms may include reduced fuel efficiency, rough idling, engine misfire, decreased power, and the illumination of the check engine light.

3. What causes the P3410 code on a Jeep?

Common causes include a faulty cylinder deactivation solenoid, clogged oil passages, low oil pressure, electrical issues such as damaged wiring or connectors, or a malfunctioning ECM.

4. Can driving with code P3410 damage my Jeepâ€™s engine?

Driving with this code for an extended time can lead to increased engine wear, poor performance, and potential damage to components if left unresolved.

5. How is the P3410 code diagnosed on a Jeep?

A mechanic will typically use an OBDII scanner to confirm the code, inspect the cylinder deactivation solenoid, check oil pressure, examine wiring and connectors, and test the ECM for proper operation.

6. What repairs can fix the P3410 code on a Jeep?

Repairs may include replacing the cylinder deactivation solenoid, cleaning or clearing oil passages, fixing damaged wiring or connectors, or reprogramming or replacing the ECM if needed.

7. Can low oil pressure cause the P3410 code to appear?

Yes, low oil pressure can prevent proper operation of the cylinder deactivation system, leading to the P3410 code.

8. How much does it cost to fix the P3410 code on a Jeep?

Repair costs can vary widely, typically ranging from $150 to $600 or more, depending on the root cause and whether parts like the solenoid or ECM need replacement.

9. Is it safe to drive my Jeep with a P3410 code?

While the vehicle may still be drivable, itâ€™s not recommended to ignore the issue, as it can lead to reduced performance and potential long-term engine damage.

10. Can a dirty or clogged oil filter trigger the P3410 code on a Jeep?

Yes, a dirty or clogged oil filter can restrict oil flow, which may interfere with the cylinder deactivation system and cause the P3410 code to appear.