AutoCodesBuick – P3052 Buick

P3052 Buick Code - DC/DC Converter Actuator Voltage Sensor Circuit 2 Low Voltage

Quick Answer

The Power Supply Transformer is used to boost battery voltage to sensitive loads during engine restart. Common causes include Faulty Power Supply Transformer, Power Supply Transformer harness is open or shorted, Power Supply Transformer circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P3052 Buick indicates DC/DC Converter Actuator Voltage Sensor Circuit 2 Low Voltage.
Common causes
Common causes include Faulty Power Supply Transformer, Power Supply Transformer harness is open or shorted, Power Supply Transformer circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 942
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 16, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P3052 Buick Description

The Power Supply Transformer is used to boost battery voltage to sensitive loads during engine restart. It provides two voltage outputs that provide the boosted voltage. The Power Supply Transformer communicates to the Engine Control Module (ECM). When the engine is not cranking, the Power Supply Transformer passes through voltage from the two supply circuits. The ECM receives data about the sensed output voltages provided by the Power Supply Transformer.
OBDII Code P3052 Buick - DC/DC Converter Actuator Voltage Sensor Circuit 2 Low Voltage - AutoCodes.com
P3052 Buick Code - DC/DC Converter Actuator Voltage Sensor Circuit 2 Low Voltage

What are the Possible Causes of the DTC P3052 Buick?

  • Faulty Power Supply Transformer
  • Power Supply Transformer harness is open or shorted
  • Power Supply Transformer circuit poor electrical connection

How to Fix the DTC P3052 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3052 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3052 Buick code?

Need more information on how to fix the P3052 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3052 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3052 Buick Code

What does OBDII code P3052 mean for a Buick?

1. P3052 indicates a fault in the DC/DC Converter Actuator Voltage Sensor Circuit 2, specifically that the sensor is detecting low voltage. 2.

What are the common symptoms of code P3052 in a Buick?

Symptoms may include a check engine light, reduced fuel efficiency, electrical system malfunctions, or difficulty starting the vehicle. 3.

What causes code P3052 to be triggered?

Common causes include a faulty voltage sensor, damaged wiring or connectors, a failing DC/DC converter, or issues with the vehicle's battery or alternator. 4.

Can I drive my Buick with code P3052 active?

It’s not recommended to drive with this code active, as it can indicate potential electrical system issues that could lead to further damage or vehicle performance problems. 5.

How do you diagnose OBDII code P3052?

Diagnosis involves checking the voltage sensor and associated wiring, testing the DC/DC converter, and verifying the integrity of the battery and alternator. 6.

What repairs can fix code P3052 in a Buick?

Repairs may include replacing the faulty voltage sensor, repairing or replacing damaged wiring, or servicing the DC/DC converter. 7.

How much does it cost to fix code P3052 in a Buick?

Repair costs vary but can range from $100 to $500, depending on whether the issue involves simple wiring repairs or replacing the DC/DC converter. 8.

Can a weak battery cause code P3052?

Yes, a weak or failing battery can result in low voltage readings and trigger this code. 9.

Is code P3052 specific to Buicks?

No, while this code appears in Buicks, it can also occur in other vehicles with similar DC/DC converter systems. 10.

Will clearing the code P3052 fix the issue?

Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P3052 Buick OBDII Code

Code P3052 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play