P3025 Code - Upstream Oxygen Sensor Signal Controller Monitoring Initialization Error Bank 2 Sensor 1
Quick Answer
This function will detect an error during the initialization and/or operation of a WRAF sensor controller through SPI communication. Common causes include Faulty Upstream Oxygen Sensor Bank 2 Sensor 1, Upstream Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Upstream Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3025 indicates Upstream Oxygen Sensor Signal Controller Monitoring Initialization Error Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Upstream Oxygen Sensor Bank 2 Sensor 1, Upstream Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Upstream Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P3025 Description
After an ECU reset, the WRAF sensor controller is started and the diagnosis determines whether the initialization has been performed in the allowed time. If not successful, then a DTC will be stored. If this is successful, then the difference is checked between the present error counter and the stored value of this error counter at ECU reset, (switching from Key
What are the Possible Causes of the DTC P3025?
- Faulty Upstream Oxygen Sensor Bank 2 Sensor 1
- Upstream Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted
- Upstream Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection
How to Fix the DTC P3025?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P3025 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P3025 code?
Need more information on how to fix the P3025 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3025 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P3025 BMW β Upstream Oxygen Sensor Signal Controller Monitoring Initialization Error Bank 2 Sensor 1
- P3025 MINI β Upstream Oxygen Sensor Signal Controller Monitoring Initialization Error Bank 2 Sensor 1
Frequently Asked Questions about P3025 Code
No Frequently Asked Questions about P3025 Code found.
Discuss the causes and fixes for P3025 OBDII Code
Code P3025 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.