P2826 2014 GMC Sierra Code - Transmission Control Solenoid Valve 9 Control Circuit Low Voltage
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2826 2014 GMC Sierra indicates Transmission Control Solenoid Valve 9 Control Circuit Low Voltage.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2826 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2826 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2826 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2826 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2826 2014 GMC Sierra code?
Need more information on how to fix the P2826 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2826 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2826 2014 GMC Sierra Code
1. What does the OBDII code P2826 mean on a 2014 GMC Sierra?
Code P2826 indicates a low voltage issue in the control circuit for Transmission Control Solenoid Valve 9, which is responsible for managing fluid flow in the transmission.
2. What are the common symptoms of code P2826 in a 2014 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P2826 code to appear in a GMC Sierra?
Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can driving with code P2826 damage my transmission?
Yes, driving with this code can potentially cause further damage to the transmission due to improper shifting or fluid flow issues.
5. How is the P2826 code diagnosed?
A technician will use a scan tool to verify the code, inspect the wiring and connectors for damage, check transmission fluid levels, and test the solenoid and its circuit for proper functionality.
6. What repairs are typically needed to fix the P2826 code?
Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring or connectors, refilling or flushing the transmission fluid, or reprogramming or replacing the TCM.
7. Can low transmission fluid cause the P2826 code?
Yes, low or contaminated transmission fluid can lead to insufficient hydraulic pressure, triggering the P2826 code.
8. How much does it cost to fix code P2826 on a 2014 GMC Sierra?
The repair cost can vary widely, ranging from $150 for minor wiring repairs to $1,000 or more if the solenoid or transmission control module needs replacement.
9. Can I reset the Check Engine Light after fixing code P2826?
Yes, you can reset the light using an OBDII scanner, but ensure the issue has been fully resolved to prevent the code from returning.
10. Is it safe to drive with the P2826 code on my GMC Sierra?
It’s not recommended to drive for extended periods with this code, as it can cause further damage to the transmission or lead to unsafe driving conditions.
Discuss the causes and fixes for P2826 2014 GMC Sierra OBDII Code
Code P2826 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
