P2825 2018 GMC Sierra Code - Transmission Control Solenoid Valve 9 Performance
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2825 2018 GMC Sierra indicates Transmission Control Solenoid Valve 9 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2825 2018 GMC Sierra Description
What are the Possible Causes of the DTC P2825 2018 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2825 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2825 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2825 2018 GMC Sierra code?
Need more information on how to fix the P2825 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2825 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2825 2018 GMC Sierra Code
1. What does the OBDII code P2825 mean on a 2018 GMC Sierra?
P2825 indicates a performance issue with Transmission Control Solenoid Valve 9, which helps manage hydraulic pressure within the transmission for smooth shifting.
2. What are the common symptoms of the P2825 code?
Symptoms may include harsh or delayed shifting, transmission slipping, poor acceleration, or the transmission being stuck in one gear.
3. What causes the P2825 code to appear?
Common causes include a faulty transmission control solenoid, wiring issues, low or dirty transmission fluid, or internal transmission problems such as valve body wear.
4. How serious is the P2825 code?
It is moderately serious. While the vehicle may still be drivable, ignoring the issue can lead to further transmission damage and costly repairs if not addressed.
5. Can low transmission fluid cause the P2825 code?
Yes, low or contaminated transmission fluid can cause insufficient hydraulic pressure, leading to solenoid performance issues.
6. How is the P2825 code diagnosed?
A technician will typically use a scan tool to confirm the code, inspect transmission fluid condition, check solenoid wiring, test the solenoid’s operation, and assess internal transmission components if necessary.
7. What repairs can fix the P2825 code?
Repairs may include replacing the faulty solenoid, repairing damaged wiring or connectors, flushing and refilling the transmission fluid, or addressing internal transmission issues.
8. Can I drive my 2018 GMC Sierra with the P2825 code?
Driving with this code is possible but not recommended, as it can lead to further transmission damage or unsafe driving conditions.
9. How much does it cost to fix the P2825 code?
Repair costs vary depending on the issue, but replacing a solenoid typically costs between $200 and $500, while internal transmission repairs can be significantly higher.
10. Can a software update fix the P2825 code?
In rare cases, a transmission control module (TCM) software update may resolve the issue, but this is less common than physical repairs like solenoid replacement or fluid servicing.
Discuss the causes and fixes for P2825 2018 GMC Sierra OBDII Code
Code P2825 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
