P2813 2014 GMC Sierra Code - Transmission Control Solenoid Valve 7 Performance
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2813 2014 GMC Sierra indicates Transmission Control Solenoid Valve 7 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2813 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2813 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2813 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2813 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2813 2014 GMC Sierra code?
Need more information on how to fix the P2813 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2813 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2813 2014 GMC Sierra Code
1. What does the OBDII code P2813 mean on a 2014 GMC Sierra?
P2813 indicates a performance issue with Transmission Control Solenoid Valve 7, which is responsible for regulating hydraulic pressure in the transmission.
2. What are the common symptoms of a P2813 code on a 2014 GMC Sierra?
Symptoms may include harsh shifting, transmission slipping, poor acceleration, or the vehicle going into limp mode.
3. What causes the P2813 code to appear?
Common causes include a faulty transmission solenoid, wiring issues, low or dirty transmission fluid, or internal transmission damage.
4. Can I drive my 2014 GMC Sierra with a P2813 code?
Driving with a P2813 code is not recommended as it can lead to further transmission damage or unsafe driving conditions.
5. How do I diagnose the P2813 code on my GMC Sierra?
Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors, and testing the solenoid circuit for proper operation.
6. How much does it cost to repair the P2813 code?
Repair costs vary but may range from $150 to $400 for solenoid replacement, with higher costs if internal transmission repairs are needed.
7. Can low transmission fluid cause the P2813 code?
Yes, low or contaminated transmission fluid can cause solenoid performance issues and trigger the P2813 code.
8. How do I fix a P2813 code on a 2014 GMC Sierra?
Repairs may include replacing the faulty solenoid, repairing damaged wiring, flushing and refilling transmission fluid, or addressing internal transmission problems.
9. What tools do I need to troubleshoot a P2813 code?
You’ll need an OBDII scanner, multimeter, and potentially a transmission pressure tester to diagnose the issue accurately.
10. Is the P2813 code common in GMC Sierras?
While not extremely common, transmission solenoid issues like P2813 can occur, especially in vehicles with high mileage or poor maintenance history.
Discuss the causes and fixes for P2813 2014 GMC Sierra OBDII Code
Code P2813 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
