AutoCodes – Chevrolet – P2813 2014 Chevrolet Silverado

P2813 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 7 Performance

Quick Answer

The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2813 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 7 Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 234

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2813 2014 Chevrolet Silverado Description

The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the Transmission Control Solenoid Valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM). The Diagnostic Trouble Code (DTC) is set when the Transmission Control Solenoid Valve Control Circuit commanded state does not match the actual state for greater than 1 s.

OBDII Code P2813 2014 Chevrolet Silverado - Transmission Control Solenoid Valve 7 Performance - AutoCodes.com — P2813 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 7 Performance

What does this mean?

What are the Possible Causes of the DTC P2813 2014 Chevrolet Silverado?

Low transmission fluid level
Dirty transmission fluid
Faulty Transmission Control Solenoid Valve
Transmission Control Solenoid Valve harness is open or shorted
Transmission Control Solenoid Valve circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC P2813 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2813 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2813 2014 Chevrolet Silverado code?

Need more information on how to fix the P2813 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2813 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2813 2014 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P2813 in a 2014 Chevrolet Silverado?

- Common symptoms include harsh shifting, transmission slipping, poor acceleration, and illuminated Check Engine light.

2. What does the OBDII code P2813 indicate in a 2014 Chevrolet Silverado?

- The code P2813 indicates an issue with Transmission Control Solenoid Valve 7 performance in the vehicle.

3. What are the possible causes of OBDII code P2813 in a 2014 Chevrolet Silverado?

- Possible causes include a faulty transmission control solenoid valve, low transmission fluid, wiring issues, or a defective transmission control module.

4. How serious is OBDII code P2813 in a 2014 Chevrolet Silverado?

- Ignoring code P2813 can lead to further damage to the transmission and potentially result in costly repairs if not addressed promptly.

5. Can OBDII code P2813 be fixed without professional help in a 2014 Chevrolet Silverado?

- While some DIY enthusiasts may attempt to fix this issue, it is recommended to seek professional help due to the complexity of transmission system repairs.

6. What are some repair tips for addressing OBDII code P2813 in a 2014 Chevrolet Silverado?

- Begin by checking the transmission fluid level and condition, inspecting the wiring harness for any damage, and testing the transmission control solenoid valve for proper function.

7. How much does it typically cost to repair OBDII code P2813 in a 2014 Chevrolet Silverado?

- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred dollars for minor fixes to over a thousand dollars for more extensive repairs.

8. Can driving with OBDII code P2813 active harm the 2014 Chevrolet Silverado?

- Continuing to drive with the P2813 code can potentially cause further damage to the transmission system, leading to more severe issues over time.

9. How long does it usually take to repair OBDII code P2813 in a 2014 Chevrolet Silverado?

- The repair time can vary based on the exact cause of the code, but it may take a few hours to a full day for a professional mechanic to diagnose and fix the issue.

10. Is it safe to reset the Check Engine light after fixing OBDII code P2813 in a 2014 Chevrolet Silverado?

- Yes, once the underlying issue causing code P2813 is resolved, it is safe to reset the Check Engine light to clear the code from the vehicle's system.