P2770 2006 Toyota Camry Code - Open in Torque Converter Clutch Solenoid Circuit
Quick Answer
The shift solenoid valve DSL is turned ON and OFF by signals from the Engine Control Module (ECM) in order to control the hydraulic pressure operation, the lock-up relay valve, which then the controls operation of the lock-up clutch. Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2770 2006 Toyota Camry indicates Open in Torque Converter Clutch Solenoid Circuit.
- Common causes
- Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2770 2006 Toyota Camry Description
Torque converter lock-up is controlled by the ECM based on engine rpm, engine load, engine temperature, vehicle speed, transmission temperature, and shift range selection. The ECM determines the lock-up status of the torque converter by comparing the engine rpm (NE) to the input turbine rpm (NT). The ECM calculates the actual transmission gear by comparing input turbine rpm (NT) to counter gear rpm (NC). When conditions are appropriate, the ECM requests "lock-up" by applying control voltage to shift solenoid DSL. When the DSL is opened, solenoid DSL applies pressure to the lock-up relay valve and locks the torque converter clutch. If the ECM detects an open or short in the DSL solenoid circuit, the ECM interprets this as a fault in the DSL solenoid or circuit. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P2770 2006 Toyota Camry?
- Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder)
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2770 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2770 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2770 2006 Toyota Camry code?
Need more information on how to fix the P2770 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2770 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2770 2006 Toyota Camry Code
1. What are the common symptoms of OBDII code P2770 in a 2006 Toyota Camry?
The common symptoms include stalling when coming to a stop, harsh shifting, poor fuel economy, and the Check Engine Light being illuminated.
2. What does the OBDII code P2770 "Open in Torque Converter Clutch Solenoid Circuit" mean for a 2006 Toyota Camry?
This code indicates that there is an issue with the electrical circuit of the torque converter clutch solenoid in the transmission.
3. What are the possible causes of OBDII code P2770 in a 2006 Toyota Camry?
Possible causes include a faulty torque converter clutch solenoid, damaged wiring or connectors in the circuit, low transmission fluid level, or a malfunctioning PCM.
4. How can I diagnose the cause of OBDII code P2770 in my 2006 Toyota Camry?
Diagnosis typically involves checking the torque converter clutch solenoid and its circuit for continuity, inspecting wiring and connectors for damage, verifying proper transmission fluid levels, and scanning the PCM for any other related fault codes.
5. How can I repair OBDII code P2770 in a 2006 Toyota Camry?
Repair options may include replacing the torque converter clutch solenoid, repairing or replacing damaged wiring or connectors, topping up transmission fluid, and clearing the trouble codes with a scan tool.
6. Can I continue to drive my 2006 Toyota Camry with OBDII code P2770?
It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the transmission and potentially cause unsafe driving conditions.
7. Will OBDII code P2770 reset itself in a 2006 Toyota Camry?
The code may reset itself if the underlying issue is intermittent, but it is best to diagnose and repair the problem to prevent further occurrences.
8. How much does it typically cost to repair OBDII code P2770 in a 2006 Toyota Camry?
The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can I clear OBDII code P2770 with a scan tool in my 2006 Toyota Camry?
Yes, you can use a scan tool to clear the trouble code after the necessary repairs have been made to address the underlying issue.
10. Is OBDII code P2770 a common problem in 2006 Toyota Camry vehicles?
While not extremely common, this code can occur in 2006 Toyota Camry vehicles due to various factors affecting the torque converter clutch solenoid circuit.
Discuss the causes and fixes for P2770 2006 Toyota Camry OBDII Code
Code P2770 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.