P2769 2011 Toyota Camry Code - Short in Torque Converter Clutch Solenoid Circuit
Quick Answer
The shift solenoid valve DSL is turned "ON" and "OFF" by signals from the Engine Control Module (ECM) in order to control the hydraulic pressure operation, the lock-up relay valve, which then the controls operation of the lock-up clutch. Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2769 2011 Toyota Camry indicates Short in Torque Converter Clutch Solenoid Circuit .
- Common causes
- Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2769 2011 Toyota Camry Description
Torque converter lock-up is controlled by the ECM based on engine rpm, engine load, engine temperature, vehicle speed, transmission temperature, and shift range selection. The ECM determines the lock-up status of the torque converter by comparing the engine rpm (NE) to the input turbine rpm (NT). The ECM calculates the actual transmission gear by comparing input turbine rpm (NT) to counter gear rpm (NC). When conditions are appropriate, the ECM requests "lock-up" by applying control voltage to shift solenoid DSL. When the DSL is opened, solenoid DSL applies pressure to the lock-up relay valve and locks the torque converter clutch. If the ECM detects an open or short in the DSL solenoid circuit, the ECM interprets this as a fault in the DSL solenoid or circuit. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P2769 2011 Toyota Camry?
- Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder)
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2769 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2769 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2769 2011 Toyota Camry code?
Need more information on how to fix the P2769 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2769 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2769 2011 Toyota Camry Code
1. What are the common symptoms of OBDII code P2769 in a 2011 Toyota Camry?
- Common symptoms include transmission shifting issues, hesitation during acceleration, and illuminated Check Engine light.
2. What does the OBDII code P2769 "Short in Torque Converter Clutch Solenoid Circuit" mean for a 2011 Toyota Camry?
- This code indicates a malfunction in the circuit responsible for controlling the torque converter clutch solenoid in the transmission.
3. What are some possible causes of OBDII code P2769 in a 2011 Toyota Camry?
- Potential causes include a faulty torque converter clutch solenoid, damaged wiring or connectors, low transmission fluid level, or a defective PCM.
4. How can I diagnose the issue related to OBDII code P2769 in my 2011 Toyota Camry?
- Diagnosing the problem may involve checking the torque converter clutch solenoid circuit for shorts, inspecting the wiring for damage, and testing the solenoid's resistance.
5. Can I continue driving my 2011 Toyota Camry with OBDII code P2769 present?
- It is not recommended to continue driving with this code active, as it can lead to further damage to the transmission and potentially result in a breakdown.
6. How can I repair OBDII code P2769 in a 2011 Toyota Camry?
- Repair options may include replacing the torque converter clutch solenoid, repairing any damaged wiring, ensuring proper transmission fluid levels, and resetting the fault code.
7. Is it possible to reset OBDII code P2769 in a 2011 Toyota Camry without fixing the underlying issue?
- While you can clear the code temporarily, it will likely reappear if the root cause of the problem is not addressed.
8. Are there any preventive maintenance measures to avoid OBDII code P2769 in a 2011 Toyota Camry?
- Regularly servicing the transmission, checking for leaks, and addressing any unusual symptoms promptly can help prevent issues leading to this fault code.
9. How long does it typically take to repair OBDII code P2769 in a 2011 Toyota Camry?
- The repair time can vary based on the exact cause of the issue, but it may take a few hours to a day for diagnostics and repairs to be completed.
10. Can a DIY enthusiast fix OBDII code P2769 in a 2011 Toyota Camry?
- While some aspects of diagnosing and repairing this code may be within reach of experienced DIYers, complex transmission issues are often best handled by professional mechanics.
Discuss the causes and fixes for P2769 2011 Toyota Camry OBDII Code
Code P2769 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
