AutoCodes – Toyota – P2769 2010 Toyota Camry

P2769 2010 Toyota Camry Code - Short in Torque Converter Clutch Solenoid Circuit

Quick Answer

The shift solenoid valve DSL is turned "ON" and "OFF" by signals from the Engine Control Module (ECM) in order to control the hydraulic pressure operation, the lock-up relay valve, which then the controls operation of the lock-up clutch. Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2769 2010 Toyota Camry indicates Short in Torque Converter Clutch Solenoid Circuit .
Common causes: Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,356

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 10, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2769 2010 Toyota Camry Description

The shift solenoid valve DSL is turned "ON" and "OFF" by signals from the Engine Control Module (ECM) in order to control the hydraulic pressure operation, the lock-up relay valve, which then the controls operation of the lock-up clutch.
Torque converter lock-up is controlled by the ECM based on engine rpm, engine load, engine temperature, vehicle speed, transmission temperature, and shift range selection. The ECM determines the lock-up status of the torque converter by comparing the engine rpm (NE) to the input turbine rpm (NT). The ECM calculates the actual transmission gear by comparing input turbine rpm (NT) to counter gear rpm (NC). When conditions are appropriate, the ECM requests "lock-up" by applying control voltage to shift solenoid DSL. When the DSL is opened, solenoid DSL applies pressure to the lock-up relay valve and locks the torque converter clutch. If the ECM detects an open or short in the DSL solenoid circuit, the ECM interprets this as a fault in the DSL solenoid or circuit. The ECM will turn on the MIL and store the DTC.

OBDII Code P2769 2010 Toyota Camry - Short in Torque Converter Clutch Solenoid Circuit - AutoCodes.com — P2769 2010 Toyota Camry Code - Short in Torque Converter Clutch Solenoid Circuit

What does this mean?

What are the Possible Causes of the DTC P2769 2010 Toyota Camry?

Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder)
Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted
Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC P2769 2010 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2769 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2769 2010 Toyota Camry code?

Need more information on how to fix the P2769 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2769 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2769 2010 Toyota Camry Code

1. What are the common symptoms of OBDII code P2769 in a 2010 Toyota Camry?

The common symptoms include rough shifting, transmission slipping, poor fuel economy, and an illuminated check engine light.

2. What does the OBDII code P2769 indicate in a 2010 Toyota Camry?

Code P2769 indicates a short in the torque converter clutch solenoid circuit of the transmission.

3. What are the possible causes of OBDII code P2769 in a 2010 Toyota Camry?

Possible causes include a faulty torque converter clutch solenoid, damaged wiring or connectors in the circuit, low transmission fluid level, or a defective PCM.

4. How can I diagnose the issue related to OBDII code P2769 in my 2010 Toyota Camry?

Diagnosing the issue involves checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the torque converter clutch solenoid, and scanning the PCM for any related fault codes.

5. Can I continue driving my 2010 Toyota Camry with OBDII code P2769?

It is not recommended to continue driving the vehicle with this code as it can lead to further damage to the transmission. It's best to address the issue promptly.

6. How can I repair OBDII code P2769 in my 2010 Toyota Camry?

Repairing the code may involve replacing the torque converter clutch solenoid, repairing or replacing damaged wiring or connectors, ensuring the transmission fluid level is correct, and resetting the fault code.

7. Is it possible to reset OBDII code P2769 in a 2010 Toyota Camry without fixing the underlying issue?

While you can clear the fault code using an OBDII scanner, it is not recommended as the issue will likely reoccur if the root cause is not addressed.

8. Will OBDII code P2769 in a 2010 Toyota Camry affect the vehicle's performance?

Yes, this code can affect the vehicle's performance by causing transmission issues like rough shifting and slipping, leading to decreased fuel efficiency and potential drivability problems.

9. How much does it typically cost to repair OBDII code P2769 in a 2010 Toyota Camry?

The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Can a DIY enthusiast fix OBDII code P2769 in a 2010 Toyota Camry?

Depending on your skill level and access to tools, you may be able to address simpler causes like checking and replacing the torque converter clutch solenoid or repairing damaged wiring. However, more complex issues may require professional assistance.