P2769 2009 Toyota Camry Code - Short in Torque Converter Clutch Solenoid Circuit
Quick Answer
The shift solenoid valve DSL is turned "ON" and "OFF" by signals from the Engine Control Module (ECM) in order to control the hydraulic pressure operation, the lock-up relay valve, which then the controls operation of the lock-up clutch. Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2769 2009 Toyota Camry indicates Short in Torque Converter Clutch Solenoid Circuit .
- Common causes
- Common causes include Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder), Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted, Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2769 2009 Toyota Camry Description
Torque converter lock-up is controlled by the ECM based on engine rpm, engine load, engine temperature, vehicle speed, transmission temperature, and shift range selection. The ECM determines the lock-up status of the torque converter by comparing the engine rpm (NE) to the input turbine rpm (NT). The ECM calculates the actual transmission gear by comparing input turbine rpm (NT) to counter gear rpm (NC). When conditions are appropriate, the ECM requests "lock-up" by applying control voltage to shift solenoid DSL. When the DSL is opened, solenoid DSL applies pressure to the lock-up relay valve and locks the torque converter clutch. If the ECM detects an open or short in the DSL solenoid circuit, the ECM interprets this as a fault in the DSL solenoid or circuit. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P2769 2009 Toyota Camry?
- Faulty Shift Solenoid Valve SL (V6) or DSL (4 cylinder)
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) harness is open or shorted
- Shift Solenoid Valve SL (V6) or DSL (4 cylinder) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2769 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2769 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2769 2009 Toyota Camry code?
Need more information on how to fix the P2769 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2769 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2769 2009 Toyota Camry Code
1. What are common symptoms of OBDII code P2769 in a 2009 Toyota Camry?
- Common symptoms include harsh shifting, transmission slipping, and decreased fuel efficiency.
2. What does the OBDII code P2769 indicate in a 2009 Toyota Camry?
- The code P2769 indicates a short in the Torque Converter Clutch Solenoid Circuit.
3. What are possible causes of the P2769 code in a 2009 Toyota Camry?
- Possible causes include a faulty torque converter clutch solenoid, damaged wiring, or a poor electrical connection.
4. How can I diagnose the cause of OBDII code P2769 in my 2009 Toyota Camry?
- Diagnose the code by checking the torque converter clutch solenoid and its circuit for any visible damage or loose connections.
5. Can I continue driving my 2009 Toyota Camry with the P2769 code present?
- It is not recommended to continue driving with the P2769 code present, as it can lead to further transmission damage.
6. How can I repair the short in the Torque Converter Clutch Solenoid Circuit in my 2009 Toyota Camry?
- Repair the issue by replacing the torque converter clutch solenoid and repairing any damaged wiring or connections.
7. Is it possible to reset the OBDII code P2769 in a 2009 Toyota Camry without repairs?
- While you can clear the code temporarily, it is essential to diagnose and repair the underlying issue to prevent further problems.
8. How much does it typically cost to fix the P2769 code in a 2009 Toyota Camry?
- The cost of fixing the P2769 code can vary depending on the specific issue, but it may range from $200 to $500 for parts and labor.
9. Can a DIY enthusiast fix the Torque Converter Clutch Solenoid Circuit short in a 2009 Toyota Camry?
- Depending on your skill level and access to tools, you may be able to replace the torque converter clutch solenoid yourself, but it is recommended to seek professional help for electrical issues.
10. How can I prevent OBDII code P2769 from reoccurring in my 2009 Toyota Camry?
- To prevent the code from reoccurring, ensure regular maintenance of your vehicle, including checking the transmission system and electrical connections for any signs of wear or damage.
Discuss the causes and fixes for P2769 2009 Toyota Camry OBDII Code
Code P2769 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
