AutoCodes – Dodge – P2763 Dodge

P2763 Dodge Code - Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit High Voltage

Quick Answer

The Torque Converter Clutch (TCC) pressure control solenoid is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2763 Dodge indicates Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit High Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,202

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2763 Dodge Description

The Torque Converter Clutch (TCC) pressure control solenoid is part of the control solenoid valve assembly which has no serviceable parts. The normally low TCC pressure control solenoid regulates oil pressure to the TCC regulator valve and TCC control valve. Increasing TCC pressure control solenoid oil pressure increases oil pressure to the torque converter to apply the clutch. The Transmission Control Module (TCM) varies the current to the TCC pressure control solenoid through a low-side driver. Increasing current to the TCC pressure control solenoid increases oil pressure by closing OFF the solenoid exhaust port. Decreasing current to the TCC pressure control solenoid decreases oil pressure by opening up the solenoid exhaust port. The TCC pressure control solenoid power is supplied by the Transmission Control Module through a high-side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected, the high-side driver will reset.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects a short to voltage on the TCC pressure control solenoid valve control circuit for 1 s.

OBDII Code P2763 Dodge - Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit High Voltage - AutoCodes.com — P2763 Dodge Code - Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2763 Dodge?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2763 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2763 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2763 Dodge code?

Need more information on how to fix the P2763 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2763 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2763 Dodge Code

What does the OBDII code P2763 mean on a Dodge vehicle?

Code P2763 indicates a high voltage issue in the torque converter clutch pressure control solenoid valve circuit, which affects the transmission's ability to lock the torque converter.

What are the common symptoms of P2763 on a Dodge?

Symptoms may include transmission slipping, reduced fuel efficiency, delayed shifting, and the check engine light turning on.

What causes the P2763 code on a Dodge?

Common causes include a faulty torque converter clutch solenoid, damaged wiring or connectors in the circuit, or transmission fluid issues such as contamination or low levels.

Can I drive my Dodge with the P2763 code active?

While the vehicle may still be drivable, ignoring the code can lead to further transmission damage and reduced performance. Itâ€™s best to address the issue promptly.

How do I diagnose the P2763 code on a Dodge?

Start by checking the transmission fluid level and condition. Inspect the wiring and connectors for damage, then test the torque converter clutch solenoid for proper functionality.

How can I fix the P2763 code on a Dodge?

Repairs may include replacing the torque converter clutch solenoid, repairing damaged wiring, cleaning electrical connectors, or flushing and refilling the transmission fluid.

What tools are needed to diagnose the P2763 code?

Youâ€™ll need an OBDII scanner, multimeter, and basic tools for inspecting and repairing electrical components.

Does the P2763 code affect fuel efficiency?

Yes, the torque converter clutch's improper operation can lead to reduced fuel efficiency due to increased engine RPMs and decreased transmission efficiency.

What is the cost to repair a P2763 code on a Dodge?

Repair costs vary depending on the issue, ranging from $100 for basic wiring repairs to $400â€“$800 for solenoid replacement, excluding labor.

Can bad transmission fluid cause the P2763 code?

Yes, contaminated or low transmission fluid can affect solenoid operation and trigger the P2763 code. Checking and replacing the fluid may resolve the issue.