P2761 2018 GMC Sierra Code - Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit
Quick Answer
The Torque Converter Clutch (TCC) pressure control solenoid is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2761 2018 GMC Sierra indicates Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2761 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an open circuit on the TCC pressure control solenoid valve control circuit for 1 s.
What are the Possible Causes of the DTC P2761 2018 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2761 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2761 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2761 2018 GMC Sierra code?
Need more information on how to fix the P2761 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2761 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2761 2018 GMC Sierra Code
1. What does OBDII code P2761 mean on a 2018 GMC Sierra?
Code P2761 indicates an issue with the torque converter clutch (TCC) pressure control solenoid valve control circuit, which helps regulate hydraulic pressure for proper torque converter operation.
2. What are the common symptoms of P2761 on a 2018 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, the check engine light turning on, or the vehicle going into limp mode.
3. What causes the P2761 code to appear in a 2018 GMC Sierra?
Common causes include a faulty TCC pressure control solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or an issue with the transmission control module (TCM).
4. How do I diagnose the P2761 code in my 2018 GMC Sierra?
Start by checking the transmission fluid level and condition, inspecting the wiring and connectors related to the TCC solenoid, and using a scan tool to monitor TCC solenoid operation.
5. Can I still drive my 2018 GMC Sierra with a P2761 code?
Driving with this code is not recommended as it may lead to further transmission damage, poor performance, and reduced fuel efficiency.
6. How do I fix the P2761 code on my 2018 GMC Sierra?
Repairs may involve replacing the TCC pressure control solenoid, fixing damaged wiring or connectors, flushing and refilling the transmission fluid, or reprogramming the TCM if needed.
7. Is the P2761 code related to low transmission fluid in a 2018 GMC Sierra?
Yes, low or contaminated transmission fluid can cause improper TCC solenoid operation, leading to this code.
8. How much does it cost to repair the P2761 code on a 2018 GMC Sierra?
Repair costs can range from $200 to $600 or more, depending on whether the solenoid, wiring, or TCM needs repair or replacement.
9. Can a faulty transmission control module cause the P2761 code in a 2018 GMC Sierra?
Yes, a malfunctioning TCM can fail to properly control the TCC solenoid circuit, triggering this code.
10. Will clearing the P2761 code solve the problem on a 2018 GMC Sierra?
Clearing the code without addressing the root cause will likely result in the code returning and could lead to further transmission issues.
Discuss the causes and fixes for P2761 2018 GMC Sierra OBDII Code
Code P2761 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
