P2761 2015 GMC Sierra Code - Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit
Quick Answer
The Torque Converter Clutch (TCC) pressure control solenoid is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2761 2015 GMC Sierra indicates Torque Converter Clutch Pressure Control Solenoid Valve Control Circuit.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2761 2015 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an open circuit on the TCC pressure control solenoid valve control circuit for 1 s.
What are the Possible Causes of the DTC P2761 2015 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2761 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2761 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2761 2015 GMC Sierra code?
Need more information on how to fix the P2761 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2761 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2761 2015 GMC Sierra Code
1. What does OBDII code P2761 mean on a 2015 GMC Sierra?
P2761 indicates an issue with the Torque Converter Clutch (TCC) Pressure Control Solenoid Valve Control Circuit, which affects the transmission's ability to regulate fluid pressure for the torque converter clutch.
2. What are the common symptoms of a P2761 code?
Symptoms may include poor fuel efficiency, slipping transmission, harsh or delayed shifting, engine stalling at low speeds, and the check engine light being illuminated.
3. What causes the P2761 code on a 2015 GMC Sierra?
Common causes include a faulty TCC pressure control solenoid, damaged wiring or connectors in the control circuit, low transmission fluid, or issues with the transmission control module (TCM).
4. Can driving with a P2761 code damage my transmission?
Yes, prolonged driving with this code can lead to further transmission damage, as the torque converter clutch may not engage or disengage properly, causing overheating or excessive wear.
5. How do I diagnose a P2761 code?
Start by checking the transmission fluid level and condition. Then inspect the wiring and connectors for damage or corrosion. If no issues are found, test the TCC solenoid and the TCM using a multimeter or scan tool.
6. How is a P2761 code typically fixed?
Repairs may include replacing a faulty TCC pressure control solenoid, repairing damaged wiring or connectors, flushing and refilling transmission fluid, or reprogramming or replacing the TCM.
7. Is a P2761 code related to low transmission fluid?
Low or contaminated transmission fluid can contribute to this code by preventing proper operation of the TCC pressure control solenoid.
8. Can I clear the P2761 code without fixing the issue?
Clearing the code without addressing the root cause will only result in the code returning, as the underlying problem will still be present.
9. How much does it cost to repair a P2761 code?
The cost depends on the exact issue but can range from $150 to $500 for parts and labor, with TCC solenoid replacement being a common repair.
10. Could a bad transmission control module cause a P2761 code?
Yes, a malfunctioning TCM may fail to properly regulate the TCC solenoid, triggering this code.
Discuss the causes and fixes for P2761 2015 GMC Sierra OBDII Code
Code P2761 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
