AutoCodes – Generic – P2760

P2760 Code - Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent

Quick Answer

The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2760 indicates Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent.
Common causes: Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,365

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 12, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2760 Description

The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. The converter clutch valve controls the TCC application and release. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through the OFF/ON/CRANK voltage circuit. The Powertrain Control Module (PCM) controls the solenoid by providing a ground path on the TCC PWM solenoid valve control circuit. Current flows through the solenoid coil according to the duty cycle, percentage of ON and OFF time. The TCC PWM solenoid valve provides a smooth engagement of the TCC by operating during a duty cycle percent of ON time.

OBDII Code P2760 - Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent - AutoCodes.com — P2760 Code - Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent

What does this mean?

What are the Possible Causes of the DTC P2760?

Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness is open or shorted
Control Solenoid Valve Assembly circuit poor electrical connection

How to Fix the DTC P2760?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2760 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2760 code?

Need more information on how to fix the P2760 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2760 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2760 Dodge — Torque Converter Clutch Pressure Control Solenoid Control Circuit Intermittent

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.