P2739 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 6 Control Circuit High Voltage
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2739 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 6 Control Circuit High Voltage.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2739 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P2739 2014 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2739 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2739 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2739 2014 Chevrolet Silverado code?
Need more information on how to fix the P2739 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2739 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2739 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P2739 in a 2014 Chevrolet Silverado?
- Common symptoms include issues with shifting gears, transmission slipping, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What could cause the Transmission Control Solenoid Valve 6 Control Circuit High Voltage error in a 2014 Chevrolet Silverado?
- Possible causes of this code may include faulty wiring, a malfunctioning transmission control solenoid, low transmission fluid levels, or a defective transmission control module.
3. How serious is the P2739 OBDII code in a 2014 Chevrolet Silverado?
- This code indicates a problem with the transmission control solenoid valve, which can affect the vehicle's performance and fuel efficiency. It is recommended to address this issue promptly to avoid potential transmission damage.
4. Can I continue driving my 2014 Chevrolet Silverado with the P2739 code present?
- While it may be possible to continue driving the vehicle with this code, it is not advisable. Continuing to drive with a transmission control issue can lead to further damage and potentially costly repairs.
5. How can I diagnose and repair the Transmission Control Solenoid Valve 6 Control Circuit High Voltage issue in my 2014 Chevrolet Silverado?
- Diagnosing and repairing this code typically involves checking the wiring for any damage, testing the transmission control solenoid, inspecting the transmission fluid level and condition, and scanning the transmission control module for faults.
6. Is it safe to reset the Check Engine Light after fixing the P2739 code in a 2014 Chevrolet Silverado?
- It is recommended to reset the Check Engine Light after addressing the underlying issue causing the P2739 code. This can be done using an OBDII scanner to clear the error code and ensure that the repair was successful.
7. How much does it cost to repair the Transmission Control Solenoid Valve 6 Control Circuit High Voltage problem in a 2014 Chevrolet Silverado?
- The cost of repairing this issue can vary depending on the exact cause of the problem and the labor rates in your area. It is advisable to consult with a mechanic or dealership for an accurate estimate.
8. Can a DIY enthusiast fix the P2739 code in a 2014 Chevrolet Silverado?
- While some DIY enthusiasts may have the skills to diagnose and repair this code, dealing with transmission control issues can be complex. It is recommended to have a professional mechanic handle such repairs for optimal results.
9. Will replacing the Transmission Control Solenoid fix the P2739 code in my 2014 Chevrolet Silverado?
- Replacing the transmission control solenoid may resolve the P2739 code if the solenoid is indeed faulty. However, it is important to diagnose the root cause of the issue accurately to ensure a successful repair.
10. How can I prevent the recurrence of the P2739 OBDII code in my 2014 Chevrolet Silverado?
- To prevent the recurrence of this code, ensure regular maintenance of your vehicle's transmission system, promptly address any transmission fluid leaks or issues, and address Check Engine Light warnings promptly to catch potential problems early.
Discuss the causes and fixes for P2739 2014 Chevrolet Silverado OBDII Code
Code P2739 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
