P2727 Dodge Code - Pressure Control Solenoid 'E' Control Circuit/Open
Quick Answer
The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'E'. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2727 Dodge indicates Pressure Control Solenoid 'E' Control Circuit/Open.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'E'.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2727 Dodge Description
What are the Possible Causes of the DTC P2727 Dodge?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty line pressure solenoid valve 'E'
- Line pressure solenoid valve 'E' harness is open or shorted
- Line pressure solenoid valve 'E' circuit poor electrical connection
How to Fix the DTC P2727 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2727 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2727 Dodge code?
Need more information on how to fix the P2727 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2727 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2727 Dodge Code
What does the OBDII code P2727 mean for a Dodge vehicle?
Code P2727 indicates an issue with the Pressure Control Solenoid 'E' Control Circuit, specifically an open circuit or electrical problem affecting the solenoid's operation.
What are the common symptoms of code P2727 in a Dodge?
Symptoms may include harsh or delayed shifting, transmission slipping, the vehicle stuck in a single gear (limp mode), and the illumination of the check engine light.
What causes the P2727 code to appear?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid levels, or internal transmission issues.
Can low transmission fluid cause the P2727 code?
Yes, insufficient transmission fluid can lead to improper solenoid operation, triggering the P2727 code.
How is code P2727 diagnosed?
A mechanic typically diagnoses P2727 by scanning for codes, inspecting wiring and connectors, testing the pressure control solenoid, and checking the transmission fluid level and condition.
Can I drive my Dodge with the P2727 code?
Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to shifting problems.
How do you fix the P2727 code on a Dodge?
Repairs may involve replacing the faulty pressure control solenoid, repairing or replacing damaged wiring, cleaning connectors, or addressing internal transmission issues if necessary.
How much does it cost to fix code P2727 in a Dodge?
The cost can vary widely but typically ranges from $200 to $500 for solenoid replacement. More extensive transmission repairs may cost significantly more.
Will clearing the code fix the issue?
Clearing the code will not fix the underlying issue. The root cause must be addressed to resolve the problem and prevent the code from returning.
Can a bad PCM cause the P2727 code?
While rare, a faulty Powertrain Control Module (PCM) can cause this code if it fails to communicate properly with the solenoid circuit.
Discuss the causes and fixes for P2727 Dodge OBDII Code
Code P2727 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
