AutoCodes – Chevrolet – P2725 Chevrolet

P2725 Chevrolet Code - Pressure Control Solenoid Valve 5 Electrical

Quick Answer

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2725 Chevrolet indicates Pressure Control Solenoid Valve 5 Electrical.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 542

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2725 Chevrolet Description

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. The normally low-pressure control solenoid 5 regulates and directs oil pressure to the 1-2-3-4 clutch regulator valve and 1-2-3-4 clutch boost valve. Increasing pressure control solenoid 5 pressure increases pressure to the 1-2-3-4 clutch. The Transmission Control Module varies the current to the pressure control solenoid 5 through a low-side driver. Increasing the current to pressure control solenoid 5 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 5 decreases oil pressure by opening the exhaust port. Pressure control solenoid 5 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected, the high-side driver will reset.

OBDII Code P2725 Chevrolet - Pressure Control Solenoid Valve 5 Electrical - AutoCodes.com — P2725 Chevrolet Code - Pressure Control Solenoid Valve 5 Electrical

What does this mean?

What are the Possible Causes of the DTC P2725 Chevrolet?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2725 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2725 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2725 Chevrolet code?

Need more information on how to fix the P2725 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2725 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2725 Chevrolet Code

1. What does the OBDII code P2725 mean on a Chevrolet?

Code P2725 refers to an electrical issue with Pressure Control Solenoid Valve 5, which helps regulate hydraulic pressure in the transmission.

2. What are the common symptoms of P2725 in a Chevrolet?

Symptoms may include harsh or delayed shifting, transmission slipping, poor acceleration, or the vehicle entering limp mode.

3. What causes the P2725 code on a Chevrolet?

Common causes include a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid, or a malfunctioning transmission control module (TCM).

4. Can low transmission fluid cause the P2725 code?

Yes, low or contaminated transmission fluid can cause irregular pressure control and trigger the P2725 code.

5. How do you diagnose the P2725 code on a Chevrolet?

Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the pressure control solenoid and wiring, checking transmission fluid levels, and testing the TCM.

6. Can you drive with the P2725 code on a Chevrolet?

Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to shifting issues.

7. How is the P2725 code repaired on a Chevrolet?

Repairs may include replacing the pressure control solenoid, repairing wiring or connectors, flushing the transmission fluid, or reprogramming/repairing the TCM.

8. What is the cost of fixing a P2725 code on a Chevrolet?

Repair costs can range from $200 to $600 or more, depending on whether the solenoid, wiring, or other components need replacement.

9. Can a faulty TCM cause the P2725 code?

Yes, a malfunctioning transmission control module can fail to properly control the solenoid, leading to the P2725 code.

10. How can you prevent the P2725 code from occurring on a Chevrolet?

Regularly maintain your transmission by changing the fluid, inspecting wiring, and addressing any transmission issues promptly to avoid solenoid malfunctions.