AutoCodes – GMC – P2724 GMC

P2724 GMC Code - Pressure Control Solenoid Valve 5 Stuck On

Quick Answer

The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2724 GMC indicates Pressure Control Solenoid Valve 5 Stuck On.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,407

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2724 GMC Description

The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. The Clutch Pressure Control Solenoid 5 regulates transmission fluid pressure to the 1-2-3-4 clutch regulator valve which controls pressure to the 1-2-3-4 clutch. The Transmission Control Module (TCM) calculates gear ratio based on the RPM signals from the Input Speed Sensor (ISS) and the Output Speed Sensor (OSS). The Transmission Control Module compares the expected transmission gear ratio to the calculated gear ratio for each commanded gear.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio change when the 1-2-3-4 clutch is commanded OFF during a shift. This condition must occur 3 times.

OBDII Code P2724 GMC - Pressure Control Solenoid Valve 5 Stuck On - AutoCodes.com — P2724 GMC Code - Pressure Control Solenoid Valve 5 Stuck On

What does this mean?

What are the Possible Causes of the DTC P2724 GMC?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2724 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2724 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2724 GMC code?

Need more information on how to fix the P2724 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2724 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

P2724 2014 GMC Sierra — Pressure Control Solenoid Valve 5 Stuck On
P2724 2015 GMC Sierra — Pressure Control Solenoid Valve 5 Stuck On
P2724 2016 GMC Sierra — Pressure Control Solenoid Valve 5 Stuck On
P2724 2017 GMC Sierra — Pressure Control Solenoid Valve 5 Stuck On
P2724 2018 GMC Sierra — Pressure Control Solenoid Valve 5 Stuck On

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.