P2724 2014 GMC Sierra Code - Pressure Control Solenoid Valve 5 Stuck On
Quick Answer
The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2724 2014 GMC Sierra indicates Pressure Control Solenoid Valve 5 Stuck On.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2724 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio change when the 1-2-3-4 clutch is commanded OFF during a shift. This condition must occur 3 times.
What are the Possible Causes of the DTC P2724 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2724 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2724 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2724 2014 GMC Sierra code?
Need more information on how to fix the P2724 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2724 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2724 2014 GMC Sierra Code
1. What does the OBDII code P2724 mean on a 2014 GMC Sierra?
P2724 indicates that the transmission control module (TCM) has detected that Pressure Control Solenoid Valve 5 is stuck in the "on" position, which can affect transmission performance.
2. What are the common symptoms of a P2724 code in a 2014 GMC Sierra?
Symptoms may include harsh or delayed shifting, slipping transmission, transmission stuck in one gear, reduced fuel efficiency, or the check engine light being illuminated.
3. What causes the P2724 code to appear on a 2014 GMC Sierra?
Common causes include a failed pressure control solenoid, contaminated transmission fluid, internal transmission damage, faulty wiring or connectors, or a malfunctioning TCM.
4. Can driving with a P2724 code damage my 2014 GMC Sierra?
Yes, driving with this code for an extended period can cause further damage to the transmission and lead to costly repairs if not addressed promptly.
5. How is the P2724 code diagnosed on a 2014 GMC Sierra?
A mechanic will typically use a scan tool to confirm the code, inspect the transmission fluid condition, check the solenoid’s electrical circuit, and perform pressure tests to verify solenoid operation.
6. How do I fix a P2724 code on my 2014 GMC Sierra?
Repairs may involve replacing the defective pressure control solenoid, cleaning or flushing the transmission fluid, repairing or replacing damaged wiring, or reprogramming or replacing the TCM.
7. What is the cost to repair a P2724 code on a 2014 GMC Sierra?
Repair costs vary but may range from $150 to $400 for solenoid replacement, while more extensive repairs, such as a TCM replacement or internal transmission work, could cost significantly more.
8. Can low or dirty transmission fluid cause a P2724 code in my 2014 GMC Sierra?
Yes, low or contaminated transmission fluid can affect solenoid operation and lead to this code. Ensuring proper fluid levels and condition is essential.
9. How can I prevent a P2724 code from occurring on my 2014 GMC Sierra?
Regular transmission maintenance, including fluid changes at recommended intervals, and addressing transmission issues promptly can help prevent this code.
10. Is it necessary to replace all solenoids if one is faulty on a 2014 GMC Sierra?
Not necessarily. If only one solenoid is faulty, replacing just that solenoid may resolve the issue. However, inspecting all solenoids for wear or contamination is recommended.
Discuss the causes and fixes for P2724 2014 GMC Sierra OBDII Code
Code P2724 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
