P2723 2016 GMC Sierra Code - Pressure Control Solenoid Valve 5 Stuck Off
Quick Answer
The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2723 2016 GMC Sierra indicates Pressure Control Solenoid Valve 5 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2723 2016 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 1-2-3-4 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2723 2016 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2723 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2723 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2723 2016 GMC Sierra code?
Need more information on how to fix the P2723 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2723 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2723 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P2723 in a 2016 GMC Sierra?
The common symptoms of OBDII code P2723 in a 2016 GMC Sierra include harsh shifting, transmission slippage, decreased fuel efficiency, and the transmission going into limp mode.
2. What does the OBDII code P2723 "Pressure Control Solenoid Valve 5 Stuck Off" mean for a 2016 GMC Sierra?
The code P2723 indicates that the Pressure Control Solenoid Valve 5 is stuck in the off position, causing issues with the transmission's hydraulic pressure regulation.
3. What are the possible causes of OBDII code P2723 in a 2016 GMC Sierra?
Possible causes of OBDII code P2723 in a 2016 GMC Sierra include a faulty pressure control solenoid valve, low transmission fluid levels, a malfunctioning transmission control module, or wiring/connectivity issues.
4. How serious is OBDII code P2723 in a 2016 GMC Sierra?
OBDII code P2723 should be addressed promptly as it can lead to more severe transmission problems if left unresolved. Continued driving with this code present can cause further damage to the transmission system.
5. How can I diagnose OBDII code P2723 in a 2016 GMC Sierra?
To diagnose OBDII code P2723, a professional mechanic can use a scan tool to read the code, inspect the transmission fluid level and condition, test the pressure control solenoid valve, and check for any wiring or connection issues.
6. Can I drive my 2016 GMC Sierra with OBDII code P2723 present?
It is not recommended to drive your 2016 GMC Sierra with OBDII code P2723 present, as it can lead to transmission issues and potential safety hazards. It's best to have the vehicle inspected and repaired as soon as possible.
7. How much does it typically cost to repair OBDII code P2723 in a 2016 GMC Sierra?
The cost to repair OBDII code P2723 in a 2016 GMC Sierra can vary depending on the exact cause of the issue. Repairs may range from a few hundred dollars for a simple fix to over a thousand dollars for more complex repairs involving the transmission system.
8. Can I reset OBDII code P2723 in a 2016 GMC Sierra on my own?
While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent further damage. Clearing the code without fixing the root problem may lead to recurring issues.
9. How long does it take to fix OBDII code P2723 in a 2016 GMC Sierra?
The time to fix OBDII code P2723 in a 2016 GMC Sierra can vary based on the exact cause of the issue and the complexity of the repair. Simple fixes may take a few hours, while more involved repairs could take a day or more.
10. What are some tips for preventing OBDII code P2723 in a 2016 GMC Sierra?
To prevent OBDII code P2723 in a 2016 GMC Sierra, it's essential to maintain regular transmission fluid checks and changes, address any transmission issues promptly, and follow the manufacturer's recommended maintenance schedule.
Discuss the causes and fixes for P2723 2016 GMC Sierra OBDII Code
Code P2723 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
