P2723 2014 Chevrolet Silverado Code - Pressure Control Solenoid Valve 5 Stuck Off
Quick Answer
The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2723 2014 Chevrolet Silverado indicates Pressure Control Solenoid Valve 5 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2723 2014 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 1-2-3-4 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2723 2014 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2723 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2723 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2723 2014 Chevrolet Silverado code?
Need more information on how to fix the P2723 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2723 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2723 2014 Chevrolet Silverado Code
What does the OBDII code P2723 mean in a 2014 Chevrolet Silverado?
P2723 indicates that the transmission control module (TCM) has detected an issue with pressure control solenoid valve 5, specifically that it is stuck in the "off" position.
What are the symptoms of code P2723 in a 2014 Chevrolet Silverado?
Common symptoms include harsh or delayed shifting, transmission slipping, poor fuel economy, and the illumination of the check engine light.
What causes the P2723 code to appear?
Possible causes include a faulty pressure control solenoid valve, low or dirty transmission fluid, wiring or connector issues in the transmission circuit, or internal transmission damage.
Can I drive my 2014 Chevrolet Silverado with a P2723 code?
Driving with a P2723 code is not recommended, as it can lead to further damage to the transmission or unsafe driving conditions due to erratic shifting.
How do I diagnose the P2723 code in a 2014 Silverado?
Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, testing the solenoid valve for proper operation, and scanning for additional transmission-related codes.
What is the role of pressure control solenoid valve 5?
Pressure control solenoid valve 5 regulates hydraulic pressure in the transmission to ensure smooth and precise gear changes.
How much does it cost to fix the P2723 code?
Repair costs vary depending on the cause, but replacing a pressure control solenoid typically costs between $200 and $500, including parts and labor.
Can low transmission fluid cause the P2723 code?
Yes, low or dirty transmission fluid can cause the solenoid to malfunction, potentially triggering the P2723 code.
Is it necessary to reprogram the TCM after fixing the P2723 code?
In some cases, reprogramming or resetting the TCM may be required to clear the code and ensure proper transmission operation.
How can I prevent the P2723 code from recurring?
Regularly check and change the transmission fluid as recommended, inspect wiring and connectors for damage, and address any transmission issues promptly to prevent future problems.
Discuss the causes and fixes for P2723 2014 Chevrolet Silverado OBDII Code
Code P2723 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.