P2716 2011 Toyota Camry Code - Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
Quick Answer
The Linear Solenoid Valve (SLT) control the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and the vehicle speed sensor. Common causes include Faulty Shift Solenoid Valve SLT, Shift Solenoid Valve SLT remain open, Shift Solenoid Valve SLT remain open harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2716 2011 Toyota Camry indicates Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT.
- Common causes
- Common causes include Faulty Shift Solenoid Valve SLT, Shift Solenoid Valve SLT remain open, Shift Solenoid Valve SLT remain open harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2716 2011 Toyota Camry Description
What are the Possible Causes of the DTC P2716 2011 Toyota Camry?
- Faulty Shift Solenoid Valve SLT
- Shift Solenoid Valve SLT remain open
- Shift Solenoid Valve SLT remain open harness is open or shorted
- Shift Solenoid Valve SLT circuit poor electrical connection
- Valve body is blocked
How to Fix the DTC P2716 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2716 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2716 2011 Toyota Camry code?
Need more information on how to fix the P2716 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2716 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2716 2011 Toyota Camry Code
1. What are the common symptoms of OBDII code P2716 in a 2011 Toyota Camry?
- Common symptoms include harsh shifting, transmission slippage, reduced fuel efficiency, and the vehicle may go into "limp mode" to prevent further damage.
2. What does the OBDII code P2716 for a 2011 Toyota Camry indicate?
- OBDII code P2716 specifically indicates an issue with the Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT in the transmission.
3. What are the possible causes of OBDII code P2716 in a 2011 Toyota Camry?
- Potential causes include a faulty solenoid, damaged wiring or connectors, low transmission fluid levels, internal transmission problems, or a faulty Engine Control Module (ECM).
4. How can I diagnose the OBDII code P2716 in my 2011 Toyota Camry?
- Diagnosis typically involves using a scan tool to retrieve the specific code, checking the transmission fluid level and condition, inspecting the wiring and connectors, and conducting a thorough transmission system test.
5. Can I continue driving my 2011 Toyota Camry with OBDII code P2716 present?
- It is not recommended to drive the vehicle with this code as it can lead to further damage to the transmission. It's best to have the issue diagnosed and repaired promptly.
6. How can I repair OBDII code P2716 in a 2011 Toyota Camry?
- Repairing this code may involve replacing the Pressure Control Solenoid 'D', repairing damaged wiring or connectors, ensuring proper transmission fluid levels, or addressing any internal transmission issues.
7. Is it possible to reset the OBDII code P2716 in a 2011 Toyota Camry without fixing the underlying issue?
- While you can clear the code with a scan tool, it will likely reappear if the root cause is not addressed. It's crucial to fix the problem to prevent further transmission issues.
8. Are there any DIY tips for addressing OBDII code P2716 in a 2011 Toyota Camry?
- DIY tips include checking the transmission fluid level and condition, inspecting the wiring for any visible damage, and ensuring the solenoid is securely connected before seeking professional help if needed.
9. How much does it cost to repair OBDII code P2716 in a 2011 Toyota Camry?
- The cost of repair can vary depending on the specific issue causing the code, with potential expenses ranging from a few hundred to over a thousand dollars, including parts and labor.
10. Can a professional mechanic help with diagnosing and repairing OBDII code P2716 in a 2011 Toyota Camry?
- Yes, a qualified mechanic with experience in transmission systems can accurately diagnose the issue and recommend the necessary repairs to resolve OBDII code P2716 in your 2011 Toyota Camry.
Discuss the causes and fixes for P2716 2011 Toyota Camry OBDII Code
-
Good article can you also include as to what to do if one gets this code, what do you replace and cost.
Thanks -
Since vehicles set the code for different reasons, we can only give you the "Possible Causes", which indicates what do you need to replace. The cost of the repair also varies, it depends if you do the repair at the dealer or independent shop.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
