AutoCodes – Dodge – P2715 Dodge

P2715 Dodge Code - Pressure Control Solenoid 'D' Stuck On

Quick Answer

The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'D'. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2715 Dodge indicates Pressure Control Solenoid 'D' Stuck On.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'D'.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,487

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2715 Dodge Description

The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).

OBDII Code P2715 Dodge - Pressure Control Solenoid 'D' Stuck On - AutoCodes.com — P2715 Dodge Code - Pressure Control Solenoid 'D' Stuck On

What does this mean?

What are the Possible Causes of the DTC P2715 Dodge?

Low transmission fluid level
Dirty transmission fluid
Faulty line pressure solenoid valve 'D'
Line pressure solenoid valve 'D' harness is open or shorted
Line pressure solenoid valve 'D' circuit poor electrical connection

How to Fix the DTC P2715 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2715 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2715 Dodge code?

Need more information on how to fix the P2715 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2715 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2715 Dodge Code

What does the OBDII code P2715 mean on a Dodge vehicle?

1. The P2715 code indicates that the Pressure Control Solenoid 'D' in the transmission is stuck in the "on" position, causing improper hydraulic pressure regulation. 2.

What are the common symptoms of P2715 in a Dodge?

Symptoms may include erratic or harsh shifting, transmission slipping, reduced fuel efficiency, and the Check Engine Light being illuminated. 3.

What causes the P2715 code to appear on a Dodge?

Common causes include a faulty pressure control solenoid, dirty or contaminated transmission fluid, a damaged transmission valve body, or electrical wiring issues. 4.

Can I continue driving my Dodge with a P2715 code?

Driving with a P2715 code is not recommended, as it can lead to further transmission damage and unsafe driving conditions. 5.

How is the P2715 code diagnosed in a Dodge vehicle?

A mechanic will use an OBDII scanner to confirm the code, inspect the transmission fluid, test the solenoid's electrical circuit, and check for physical damage to the transmission components. 6.

How can I fix the P2715 code on my Dodge?

Repairs may involve replacing the faulty solenoid, performing a transmission fluid flush, repairing damaged wiring, or replacing the valve body if necessary. 7.

Does a transmission fluid change fix the P2715 code?

A transmission fluid change can resolve the issue if the code is caused by dirty or contaminated fluid, but it wonâ€™t fix mechanical or electrical faults. 8.

How much does it cost to repair a P2715 code on a Dodge?

Repair costs can vary, but replacing a pressure control solenoid typically ranges from $200 to $500, depending on parts and labor. 9.

Can a bad PCM cause the P2715 code in a Dodge?

Yes, although rare, a malfunctioning Powertrain Control Module (PCM) may cause the P2715 code by failing to properly control the solenoid. 10.

What should I check first if I see a P2715 code on my Dodge?

Start by inspecting the transmission fluid for contamination or low levels, and then check the wiring and connections to the pressure control solenoid.