P2714 2018 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance
Quick Answer
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2018 Toyota RAV4 indicates Pressure Control Solenoid 'D' Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2018 Toyota RAV4 Description
The ECM calculates the amount of heat absorbed by the friction material based on the difference in speed (clutch slippage) between the turbine and output shaft. The ECM turns on the MIL and stores this Diagnostic Trouble Code (DTC) when the amount of heat absorption exceeds the specified value.
When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.
What are the Possible Causes of the DTC P2714 2018 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
- Pressure Control Solenoid 'D' valve harness is open or shorted
- Pressure Control Solenoid 'D' valve circuit poor electrical connection
- Transmission valve body assembly is blocked
- Faulty Automatic transaxle assembly
How to Fix the DTC P2714 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2018 Toyota RAV4 code?
Need more information on how to fix the P2714 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2018 Toyota RAV4 Code
1. What does the OBDII code P2714 mean on a 2018 Toyota RAV4?
Code P2714 indicates a performance issue with Pressure Control Solenoid 'D' in the transmission, which regulates hydraulic pressure for smooth gear shifts.
2. What are the symptoms of the P2714 code in a 2018 Toyota RAV4?
Common symptoms include harsh or delayed shifting, transmission slipping, poor acceleration, and the check engine light turning on.
3. What causes the P2714 code on a 2018 Toyota RAV4?
Potential causes include a faulty pressure control solenoid, low or dirty transmission fluid, a damaged transmission valve body, or issues with the wiring or connectors.
4. Is it safe to drive my 2018 Toyota RAV4 with a P2714 code?
Driving with this code is not recommended, as it can lead to further damage to the transmission and unsafe driving conditions due to shifting issues.
5. How do I fix the P2714 code on my 2018 Toyota RAV4?
Repairs may include replacing the pressure control solenoid, flushing and refilling the transmission fluid, repairing damaged wiring, or inspecting and repairing the valve body.
6. How much does it cost to repair a P2714 code on a 2018 Toyota RAV4?
The cost varies but typically ranges from $150 to $400 for solenoid replacement or $100 to $200 for a transmission fluid change. More extensive repairs can cost $500 or more.
7. Can low or dirty transmission fluid cause the P2714 code?
Yes, low or contaminated transmission fluid can restrict hydraulic pressure, leading to solenoid performance issues and triggering the P2714 code.
8. How do I check the transmission fluid on a 2018 Toyota RAV4?
The 2018 Toyota RAV4 has a sealed transmission system, so checking or replacing the fluid typically requires professional equipment and expertise.
9. Can a P2714 code be caused by an electrical problem?
Yes, a damaged or corroded wiring harness, loose connectors, or electrical shorts can lead to solenoid performance issues and trigger this code.
10. Does the P2714 code mean I need a new transmission?
Not necessarily. This code often points to specific solenoid or fluid issues that can be repaired without replacing the entire transmission.
Discuss the causes and fixes for P2714 2018 Toyota RAV4 OBDII Code
Code P2714 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
