AutoCodes – Toyota – P2714 2016 Toyota RAV4

P2714 2016 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance

Quick Answer

Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2714 2016 Toyota RAV4 indicates Pressure Control Solenoid 'D' Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 602

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 12, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2714 2016 Toyota RAV4 Description

Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. The Engine Control Module (ECM) adjusts the current to the shift solenoid valve SLT to control hydraulic line pressure coming from the primary regulator valve. Appropriate line pressure assures smooth shifting with varying engine outputs.
The ECM calculates the amount of heat absorbed by the friction material based on the difference in speed (clutch slippage) between the turbine and output shaft. The ECM turns on the MIL and stores this Diagnostic Trouble Code (DTC) when the amount of heat absorption exceeds the specified value.
When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.

OBDII Code P2714 2016 Toyota RAV4 - Pressure Control Solenoid 'D' Performance - AutoCodes.com — P2714 2016 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance

What does this mean?

What are the Possible Causes of the DTC P2714 2016 Toyota RAV4?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
Pressure Control Solenoid 'D' valve harness is open or shorted
Pressure Control Solenoid 'D' valve circuit poor electrical connection
Transmission valve body assembly is blocked
Faulty Automatic transaxle assembly

How to Fix the DTC P2714 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2714 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2714 2016 Toyota RAV4 code?

Need more information on how to fix the P2714 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2714 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2714 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2714 in a 2016 Toyota RAV4?

- Common symptoms include harsh shifting, transmission slippage, decreased fuel efficiency, and the transmission staying in one gear.

2. What causes the OBDII code P2714 in a 2016 Toyota RAV4?

- The code is typically triggered by issues with the pressure control solenoid 'D', which can be caused by electrical faults, fluid contamination, or mechanical failures.

3. How serious is OBDII code P2714 in a 2016 Toyota RAV4?

- This code indicates a problem with the transmission pressure control solenoid, which can lead to transmission issues if not addressed promptly. It is advisable to address this problem as soon as possible.

4. Can I continue driving my 2016 Toyota RAV4 with OBDII code P2714?

- It is not recommended to continue driving the vehicle with this code, as it can lead to further damage to the transmission. It is best to have the issue diagnosed and repaired by a qualified technician.

5. How can I diagnose the underlying issue causing OBDII code P2714 in my 2016 Toyota RAV4?

- Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors related to the pressure control solenoid 'D', and performing tests on the solenoid itself.

6. Is it possible to repair OBDII code P2714 in a 2016 Toyota RAV4 without professional help?

- While some DIY enthusiasts may attempt to address this code, it is recommended to seek professional help due to the complexity of transmission systems. A qualified technician can accurately diagnose and repair the issue.

7. What are the typical repair options for OBDII code P2714 in a 2016 Toyota RAV4?

- Repair options may include replacing the pressure control solenoid 'D', repairing or replacing damaged wiring, flushing the transmission fluid, and resetting the fault codes.

8. How much does it cost to fix OBDII code P2714 in a 2016 Toyota RAV4?

- The cost of repair can vary depending on the underlying issue, parts needed, and labor rates. It is advisable to get a diagnosis from a trusted mechanic to determine the exact cost.

9. Can resetting the OBDII code P2714 in a 2016 Toyota RAV4 fix the issue?

- Resetting the code may temporarily turn off the check engine light, but it won't fix the underlying problem causing the code. It is essential to diagnose and address the root cause of the issue.

10. How can I prevent OBDII code P2714 from reoccurring in my 2016 Toyota RAV4?

- Regular maintenance of the transmission, including fluid changes at recommended intervals, can help prevent issues like pressure control solenoid 'D' performance problems.