P2714 2006 Toyota Camry Code - Pressure Control Solenoid 'D' Performance/Stuck Off Valve SLT
Quick Answer
The Linear Solenoid Valve (SLT) control the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and the vehicle speed sensor. Common causes include Faulty Shift Solenoid Valve SLT, Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open, Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2006 Toyota Camry indicates Pressure Control Solenoid 'D' Performance/Stuck Off Valve SLT.
- Common causes
- Common causes include Faulty Shift Solenoid Valve SLT, Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open, Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2006 Toyota Camry Description
What are the Possible Causes of the DTC P2714 2006 Toyota Camry?
- Faulty Shift Solenoid Valve SLT
- Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open
- Shift Solenoid Valve SL1, SL2, SL3 or SL3 remain open harness is open or shorted
- Shift Solenoid Valve SL1, SL2, SL3 or SL3 circuit poor electrical connection
- Valve body is blocked
How to Fix the DTC P2714 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2006 Toyota Camry code?
Need more information on how to fix the P2714 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2006 Toyota Camry Code
1. What does the OBDII code P2714 mean on a 2006 Toyota Camry?
P2714 indicates an issue with the Pressure Control Solenoid 'D' (also known as the SLT solenoid) in the transmission. It suggests the solenoid is either underperforming or stuck in the "off" position.
2. What are the common symptoms of code P2714 in a 2006 Toyota Camry?
Symptoms may include harsh or delayed shifting, transmission slippage, poor fuel economy, and the check engine light being illuminated.
3. What causes code P2714 to appear on a 2006 Toyota Camry?
Common causes include a faulty or stuck pressure control solenoid, dirty or low transmission fluid, internal transmission issues, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2006 Toyota Camry with a P2714 code?
Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to erratic shifting.
5. How do I diagnose the P2714 code on a 2006 Toyota Camry?
Diagnosis typically involves checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the pressure control solenoid for proper operation.
6. How can I fix the P2714 code on my 2006 Toyota Camry?
Repairs may include replacing the SLT solenoid, flushing and refilling the transmission fluid, repairing damaged wiring, or, in severe cases, rebuilding the transmission.
7. How much does it cost to repair a P2714 code on a 2006 Toyota Camry?
Repair costs vary but typically range from $150 to $400 for solenoid replacement. More extensive transmission repairs can be significantly more expensive.
8. What type of transmission fluid should I use for my 2006 Toyota Camry to prevent P2714?
Use Toyota WS (World Standard) automatic transmission fluid as specified in the owner's manual to maintain proper solenoid operation.
9. Can low or dirty transmission fluid cause the P2714 code in a 2006 Toyota Camry?
Yes, low or contaminated transmission fluid can affect solenoid performance and trigger the P2714 code.
10. Do I need to reprogram the TCM after fixing the P2714 code on my 2006 Toyota Camry?
In some cases, reprogramming or resetting the TCM may be necessary to clear the code and ensure proper transmission function.
Discuss the causes and fixes for P2714 2006 Toyota Camry OBDII Code
Code P2714 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
