AutoCodes – Generic – P2710

P2710 Code - Shift Solenoid 'F' Intermittent

Quick Answer

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2710 indicates Shift Solenoid 'F' Intermittent.
Common causes: Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,150

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 29, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2710 Description

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. The continuity of each solenoid circuit is periodically tested. Each inactive solenoid is turned on for a few milliseconds, then off. Each active solenoid is turned off for a few milliseconds, then on. This pulsing of voltage to the solenoid causes an inductive spike which can be sensed by the Transmission Control System. If an inductive spike is not sensed by the Transmission Control System during the continuity check, it is tested again. If the test fails three consecutive times, the appropriate Diagnostic Trouble Code (DTC) is set. If the solenoid test is run in response to a gear ratio or pressure switch error, one failure will result in setting the appropriate DTC.

OBDII Code P2710 - Shift Solenoid 'F' Intermittent - AutoCodes.com — P2710 Code - Shift Solenoid 'F' Intermittent

What does this mean?

What are the Possible Causes of the DTC P2710?

Dirty or Low Transmission Fluid
Faulty Shift Solenoid 'F'
Shift Solenoid 'F' harness is open or shorted
Shift Solenoid 'F' circuit poor electrical connection

How to Fix the DTC P2710?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2710 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2710 code?

Need more information on how to fix the P2710 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2710 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2710 Dodge — Shift Solenoid 'F' Intermittent

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2710 Code

1. What are the common symptoms of OBDII code P2710 (Shift Solenoid 'F' Intermittent)?

- Common symptoms include harsh shifting, delayed shifting, transmission slipping, and potential stalling of the vehicle.

2. What are the possible causes of OBDII code P2710?

- The code P2710 can be caused by a faulty shift solenoid 'F', low transmission fluid, wiring issues, or a malfunctioning transmission control module.

3. How can I diagnose the shift solenoid 'F' to confirm it is the cause of OBDII code P2710?

- A proper diagnosis involves checking the shift solenoid 'F' for proper operation using a multimeter, conducting a visual inspection of the wiring, and testing the transmission fluid level and condition.

4. Can low transmission fluid cause OBDII code P2710 to trigger?

- Yes, low transmission fluid can cause issues with shift solenoids, including solenoid 'F', leading to the triggering of OBDII code P2710.

5. What are some repair tips for fixing OBDII code P2710 related to shift solenoid 'F'?

- Repair tips include replacing the faulty shift solenoid 'F', addressing any wiring issues, ensuring proper transmission fluid levels, and resetting the trouble code to see if the issue persists.

6. Is it safe to continue driving with OBDII code P2710 present?

- It is not recommended to continue driving with OBDII code P2710 present, as it can lead to further damage to the transmission and potentially leave you stranded on the road.

7. How much does it typically cost to repair OBDII code P2710 related to shift solenoid 'F'?

- The cost of repairing OBDII code P2710 can vary depending on the underlying issue, but it may range from $200 to $500 for parts and labor.

8. Can I reset OBDII code P2710 myself, or do I need a professional mechanic?

- You can attempt to reset OBDII code P2710 yourself using an OBDII scanner, but if the issue persists, it is recommended to seek the help of a professional mechanic for proper diagnosis and repairs.

9. Are there any preventive measures to avoid OBDII code P2710 related to shift solenoid 'F' in the future?

- Regular transmission fluid checks and changes, ensuring proper maintenance of the transmission system, and addressing any shifting issues promptly can help prevent the recurrence of OBDII code P2710.

10. How long does it take to fix OBDII code P2710 once the issue is identified?

- The time to fix OBDII code P2710 related to shift solenoid 'F' can vary depending on the extent of the issue and availability of parts, but it may take a few hours to a full day for repairs to be completed.