AutoCodes – Dodge – P2706 Dodge

P2706 Dodge Code - Shift Solenoid 'F'

Quick Answer

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2706 Dodge indicates Shift Solenoid 'F'.
Common causes: Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 32,687

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 27, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2706 Dodge Description

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. The continuity of each solenoid circuit is periodically tested. Each inactive solenoid is turned on for a few milliseconds, then off. Each active solenoid is turned off for a few milliseconds, then on. This pulsing of voltage to the solenoid causes an inductive spike which can be sensed by the Transmission Control System. If an inductive spike is not sensed by the Transmission Control System during the continuity check, it is tested again. If the test fails three consecutive times, the appropriate Diagnostic Trouble Code (DTC) is set. If the solenoid test is run in response to a gear ratio or pressure switch error, one failure will result in setting the appropriate DTC.

OBDII Code P2706 Dodge - Shift Solenoid 'F' - AutoCodes.com — P2706 Dodge Code - Shift Solenoid 'F'

What does this mean?

What are the Possible Causes of the DTC P2706 Dodge?

Dirty or Low Transmission Fluid
Faulty Shift Solenoid 'F'
Shift Solenoid 'F' harness is open or shorted
Shift Solenoid 'F' circuit poor electrical connection

How to Fix the DTC P2706 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2706 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2706 Dodge code?

Need more information on how to fix the P2706 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2706 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2706 Dodge Code

1. What are the common symptoms of OBDII code P2706 in a Dodge related to Shift Solenoid 'F'?

- Common symptoms include harsh shifting, delayed shifting, transmission slipping, and the transmission staying in one gear.

2. What are some possible causes of OBDII code P2706 in a Dodge related to Shift Solenoid 'F'?

- Potential causes include a faulty shift solenoid 'F', low transmission fluid level, dirty transmission fluid, or a damaged wiring harness.

3. How can I diagnose OBDII code P2706 in a Dodge?

- Diagnosis typically involves using a scan tool to read the code, checking the transmission fluid level and condition, inspecting the wiring harness for any damage, and testing the shift solenoid 'F' for proper operation.

4. Can OBDII code P2706 in a Dodge related to Shift Solenoid 'F' be repaired at home?

- Depending on the cause, some repairs such as replacing a faulty shift solenoid 'F' or cleaning the transmission fluid may be possible for DIY enthusiasts. However, more complex issues may require professional intervention.

5. How important is it to address OBDII code P2706 in a Dodge related to Shift Solenoid 'F' promptly?

- It is crucial to address this code promptly as ignoring it can lead to further transmission damage, poor vehicle performance, and potential safety risks on the road.

6. Are there any preventive maintenance tips to avoid OBDII code P2706 in a Dodge related to Shift Solenoid 'F'?

- Regularly servicing the transmission, ensuring proper fluid levels and quality, and addressing any transmission-related issues promptly can help prevent OBDII code P2706 from appearing.

7. What are the potential risks of driving with OBDII code P2706 in a Dodge related to Shift Solenoid 'F'?

- Driving with this code present can lead to transmission issues such as gear slippage, increased fuel consumption, and potential transmission failure if left unaddressed for an extended period.

8. How much does it typically cost to repair OBDII code P2706 in a Dodge related to Shift Solenoid 'F'?

- The cost of repair can vary depending on the exact cause of the code, but it may range from a few hundred to a few thousand dollars, including parts and labor.

9. Can resetting the OBDII code P2706 in a Dodge related to Shift Solenoid 'F' temporarily resolve the issue?

- While resetting the code may temporarily remove the warning light, it will not fix the underlying problem causing the code. It is recommended to diagnose and repair the issue to prevent further damage.

10. Is it safe to continue driving my Dodge with OBDII code P2706 related to Shift Solenoid 'F' if the vehicle seems to be running fine?

- Even if the vehicle seems to be running fine, it is not advisable to continue driving with this code present, as it can lead to more severe transmission issues over time. It is best to address the problem promptly.