P2704 Ford Code - Transmission Friction Element 'E' Apply Time Range/Performance
Quick Answer
The intermediate (SSPC-C), low/reverse (SSPC-E) and overdrive (SSPC-B) clutches are each controlled by a directly proportional Variable Force Shift (VFS) Solenoid. Common causes include Faulty Reverse Clutch Solenoid, Reverse Clutch Solenoid harness is open or shorted, Reverse Clutch Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2704 Ford indicates Transmission Friction Element 'E' Apply Time Range/Performance.
- Common causes
- Common causes include Faulty Reverse Clutch Solenoid, Reverse Clutch Solenoid harness is open or shorted, Reverse Clutch Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2704 Ford Description
The PCM monitors the Low Reverse Clutch. The Diagnostic Trouble Code (DTC) will set when the PCM has detected a failure within the low reverse clutch system.
What are the Possible Causes of the DTC P2704 Ford?
- Faulty Reverse Clutch Solenoid
- Reverse Clutch Solenoid harness is open or shorted
- Reverse Clutch Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2704 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2704 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2704 Ford code?
Need more information on how to fix the P2704 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2704 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2704 Ford Code
1. What are common symptoms of OBDII code P2704 in a Ford vehicle?
- Common symptoms include harsh or delayed shifting, transmission slipping, decreased fuel efficiency, and illuminated Check Engine Light.
2. What does OBDII code P2704 Ford indicate regarding the Transmission Friction Element 'E' Apply Time Range/Performance?
- This code indicates that there is an issue with the 'E' friction element in the transmission in terms of applying time range or performance.
3. What are possible causes of OBDII code P2704 in a Ford vehicle?
- Possible causes include a faulty transmission solenoid, low transmission fluid level, dirty transmission fluid, wiring issues, or a faulty transmission control module.
4. How can I diagnose the OBDII code P2704 in my Ford vehicle?
- Diagnosing this code typically involves using a scan tool to retrieve the trouble codes, checking the transmission fluid level and condition, inspecting for any visible transmission leaks, and testing the transmission solenoids.
5. Can I continue driving my Ford vehicle with OBDII code P2704 present?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the transmission and potential safety issues on the road.
6. How can I repair OBDII code P2704 in my Ford vehicle?
- Repair options may include replacing the faulty transmission solenoid, performing a transmission fluid flush and filter change, addressing any wiring issues, or reprogramming the transmission control module.
7. Is it possible to clear OBDII code P2704 in a Ford vehicle without making repairs?
- While clearing the code may temporarily turn off the Check Engine Light, it is important to address the underlying issue causing the code to prevent further transmission problems.
8. How much does it typically cost to repair OBDII code P2704 in a Ford vehicle?
- The cost of repairs can vary depending on the specific cause of the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Are there any preventive maintenance tips to avoid OBDII code P2704 in a Ford vehicle?
- Regularly servicing the transmission, checking and maintaining proper fluid levels, and addressing any transmission issues promptly can help prevent the occurrence of this code.
10. Can a DIY enthusiast with mechanical knowledge fix OBDII code P2704 in a Ford vehicle?
- Depending on the specific cause of the code, some DIY enthusiasts may be able to address simpler issues like checking and topping up transmission fluid. However, more complex repairs may require professional expertise.
Discuss the causes and fixes for P2704 Ford OBDII Code
Code P2704 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
