P2670 2014 GMC Sierra Code - Actuator High Control Circuit Group 2 Low Voltage
Quick Answer
The Transmission Control Module (TCM) receives information from a variety of sensors, switches, and serial data information from other control modules. Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2670 2014 GMC Sierra indicates Actuator High Control Circuit Group 2 Low Voltage.
- Common causes
- Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2670 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2670 2014 GMC Sierra?
- Faulty Transmission Control Solenoid Valve
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
How to Fix the DTC P2670 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2670 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2670 2014 GMC Sierra code?
Need more information on how to fix the P2670 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2670 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2670 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P2670 on a 2014 GMC Sierra?
- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and possible stalling while driving.
2. What does the OBDII code P2670 "Actuator High Control Circuit Group 2 Low Voltage" indicate in a 2014 GMC Sierra?
- This code indicates that there is low voltage detected in the control circuit of Actuator Group 2 in the GMC Sierra's engine system.
3. What are the possible causes of OBDII code P2670 in a 2014 GMC Sierra?
- Possible causes include a faulty actuator, damaged wiring or connectors in the control circuit, low battery voltage, or a malfunctioning engine control module.
4. How can I diagnose the OBDII code P2670 in my 2014 GMC Sierra?
- Diagnosing this code may involve checking the actuator and control circuit for any visible damage, testing the voltage levels, and using an OBDII scanner to gather more specific diagnostic information.
5. Can I continue driving my 2014 GMC Sierra with OBDII code P2670 present?
- It is not recommended to continue driving with this code active, as it can lead to further engine damage and potential safety issues. It is best to address the underlying problem as soon as possible.
6. How can I repair OBDII code P2670 in my 2014 GMC Sierra?
- Repairing this code may involve replacing the faulty actuator, repairing or replacing damaged wiring or connectors, checking and correcting low voltage issues, or reprogramming the engine control module.
7. Is it possible to reset the OBDII code P2670 in a 2014 GMC Sierra without repairing the issue?
- While you can clear the code using an OBDII scanner, it is important to address the underlying problem causing the code to prevent further issues with your vehicle.
8. Can a DIY enthusiast fix OBDII code P2670 in a 2014 GMC Sierra?
- Depending on your skill level and access to tools, a DIY enthusiast may be able to address this code by following repair guides, but it is recommended to have a professional mechanic diagnose and repair the issue for accurate and efficient resolution.
9. How much does it typically cost to repair OBDII code P2670 in a 2014 GMC Sierra?
- The cost of repairing this code can vary based on the specific cause of the issue, the parts needed for replacement, and the labor rates of the repair shop. It is advisable to obtain quotes from multiple mechanics for an accurate estimate.
10. Will OBDII code P2670 cause my 2014 GMC Sierra to fail an emissions test?
- Yes, this code can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems. It is important to address the issue to ensure your vehicle meets emissions standards.
Discuss the causes and fixes for P2670 2014 GMC Sierra OBDII Code
Code P2670 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
