P2642 Chevrolet Code - Torque Management Feedback Signal 'B' Range/Performance
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2642 Chevrolet indicates Torque Management Feedback Signal 'B' Range/Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2642 Chevrolet Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2642 Chevrolet?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2642 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2642 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2642 Chevrolet code?
Need more information on how to fix the P2642 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2642 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2642 Chevrolet Code
1. What are the common symptoms of OBDII code P2642 in a Chevrolet vehicle?
- Common symptoms include rough idling, reduced engine power, poor acceleration, and illuminated Check Engine Light.
2. What can cause the OBDII code P2642 to trigger in a Chevrolet?
- The code P2642 usually triggers due to issues with the torque management feedback signal 'B', which can be caused by a faulty sensor, wiring issues, or a problem with the engine control module.
3. How serious is the OBDII code P2642 in a Chevrolet?
- While the code itself may not cause immediate engine failure, it is important to address it promptly to prevent potential long-term damage to the engine components.
4. How can I diagnose the OBDII code P2642 in my Chevrolet?
- Diagnosing the code typically involves using a scan tool to check for the code, inspecting the wiring and connectors related to the torque management feedback signal 'B', and testing the sensor for proper functionality.
5. Can I drive my Chevrolet with the OBDII code P2642?
- It is not recommended to drive your vehicle with the code P2642 present, as it can lead to performance issues and potential engine damage.
6. How much does it cost to repair the OBDII code P2642 in a Chevrolet?
- The cost of repairing the code P2642 can vary depending on the underlying cause, but it may involve replacing a faulty sensor, repairing damaged wiring, or reprogramming the engine control module. Costs can range from $100 to $500 or more.
7. Can I repair the OBDII code P2642 in my Chevrolet myself?
- If you have the necessary tools and expertise, you may be able to address some of the common causes of the code, such as checking and repairing wiring connections or replacing a faulty sensor. However, complex issues may require professional assistance.
8. Will resetting the Check Engine Light resolve the OBDII code P2642 in my Chevrolet?
- Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to return. It is recommended to diagnose and repair the root cause of the code.
9. Is the OBDII code P2642 specific to Chevrolet vehicles only?
- While the specific code P2642 may be associated with Chevrolet vehicles, similar codes related to torque management feedback signal issues can be found in other vehicle makes and models.
10. What is the best course of action if I encounter the OBDII code P2642 in my Chevrolet?
- The best course of action is to diagnose the code promptly, address any underlying issues causing the code, and make necessary repairs to ensure the proper functioning of your vehicle.
Discuss the causes and fixes for P2642 Chevrolet OBDII Code
Code P2642 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
