P2635 Code - Fuel Pump Flow Performance
Quick Answer
The Engine Control Module (ECM) supplies voltage to the fuel pump driver control module when the ECM detects that the ignition is on. Common causes include Faulty Fuel Pump, Fuel Pump harness is open or shorted, Fuel Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2635 indicates Fuel Pump Flow Performance.
- Common causes
- Common causes include Faulty Fuel Pump, Fuel Pump harness is open or shorted, Fuel Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2635 Description
The Diagnostic Trouble Code (DTC) will be set when the fuel pump driver control module detects a difference of ± 60 kPa (8.7 PSI) at 400 kPa (58 PSI) request or ±45 kPa (6.5 PSI) at 300 kPa (43.5 PSI) request between the desired fuel pressure and the actual fuel pressure for approximately 10 s.
What are the Possible Causes of the DTC P2635?
- Faulty Fuel Pump
- Fuel Pump harness is open or shorted
- Fuel Pump circuit poor electrical connection
- Faulty Fuel Pump Control Module (if applicable)
How to Fix the DTC P2635?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2635 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2635 code?
Need more information on how to fix the P2635 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2635 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2635 Buick — Fuel Pump Flow Performance
- P2635 Cadillac — Fuel Pump Flow Performance
- P2635 Chevrolet — Fuel Pump Flow Performance
- P2635 Dodge — Fuel Pump Flow Performance
- P2635 Ford — Fuel Pump Flow Performance
- P2635 GMC — Fuel Pump Flow Performance
Frequently Asked Questions about P2635 Code
1. What are the common symptoms of OBDII code P2635 (Fuel Pump Flow Performance)?
- Common symptoms include issues with engine performance, decreased fuel efficiency, and difficulty starting the vehicle.
2. What are the possible causes of OBDII code P2635?
- Possible causes include a faulty fuel pump, clogged fuel filter, fuel pressure regulator problems, or issues with the fuel pump control module.
3. How can I diagnose the OBDII code P2635?
- Diagnosing this code may involve checking the fuel pump pressure, inspecting the fuel filter for blockages, and testing the fuel pump control module for malfunctions.
4. What are some repair tips for fixing OBDII code P2635?
- Repair tips may include replacing the fuel pump, cleaning or replacing the fuel filter, checking and repairing any damaged wiring, or reprogramming the fuel pump control module.
5. Can OBDII code P2635 cause damage to other vehicle components?
- If left unresolved, this code can potentially cause damage to the fuel pump, fuel injectors, and other engine components due to insufficient fuel flow.
6. How urgent is it to address OBDII code P2635?
- It is important to address this code promptly to prevent further damage to the fuel system and ensure the proper functioning of the vehicle.
7. Can a DIY enthusiast fix OBDII code P2635, or is professional help recommended?
- Depending on your experience and knowledge, some DIY enthusiasts may be able to tackle the repairs for this code, but professional help is recommended for complex issues.
8. Is it safe to continue driving with OBDII code P2635 present?
- It is not recommended to continue driving with this code present, as it can lead to potential engine performance issues and fuel system damage.
9. How much does it typically cost to repair OBDII code P2635?
- The cost of repairing this code can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Can OBDII code P2635 be prevented in the future?
- Regularly maintaining the fuel system, changing the fuel filter as recommended by the manufacturer, and addressing any fuel pump issues promptly can help prevent this code from occurring in the future.
Discuss the causes and fixes for P2635 OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
